How to service and repair the Brake Master Cylinder on 2001 Toyota Sequoia?

Begin service and repair on the Brake Master Cylinder with reservoir removal following set screw extraction and reservoir pull out and completing the operation with 1.5 Nm torque (15 kgf-cm, 13 inch lbs.). After strainer and cap removal from the reservoir position the technician should remove 2 grommets, the seal, and 2 master cylinder pressure sensors using 25 Nm (250 kgf-cm, 18 ft. lbs.) torque. Inspection of the cylinder requires compressed air cleaning then checking for wear and damage followed by cleaning or replacing the cylinder assembly. The assembly process requires the reverse order of disassembly steps while greasing the marked rubber parts with lithium soap base glycol grease.

OEM 2001 Toyota Sequoia Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2001 Toyota Sequoia Master Cylinder
Part Number: 47201-0C041
$478.05 MSRP: $700.59
You Save: $222.54 (32%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master
- Replaces: 47201-0C040
- Part Name Code: 47201
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.3 x 10.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-0C041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
2001 Toyota Sequoia Master Cylinder
Part Number: 47201-0C012
Product Specifications
- Other Name: Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir; Cylinder Sub-Assembly, Brake Master
- Manufacturer Note: W/O(VSC)
- Replaces: 47201-0C011, 47201-0C010
- Part Name Code: 47201
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.3 x 6.8 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 47201-0C012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2001 Toyota Sequoia Brake Master Cylinder

Looking for affordable OEM 2001 Toyota Sequoia Brake Master Cylinder? Explore our comprehensive catalogue of genuine 2001 Toyota Sequoia Brake Master Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Sequoia Brake Master Cylinder Parts Q&A

Q: How to service and repair the Brake Master Cylinder on 2001 Toyota Sequoia?
A: Begin service and repair on the Brake Master Cylinder with reservoir removal following set screw extraction and reservoir pull out and completing the operation with 1.5 Nm torque (15 kgf-cm, 13 inch lbs.). After strainer and cap removal from the reservoir position the technician should remove 2 grommets, the seal, and 2 master cylinder pressure sensors using 25 Nm (250 kgf-cm, 18 ft. lbs.) torque. Inspection of the cylinder requires compressed air cleaning then checking for wear and damage followed by cleaning or replacing the cylinder assembly. The assembly process requires the reverse order of disassembly steps while greasing the marked rubber parts with lithium soap base glycol grease.

Alternate Year Models

2002 Toyota Sequoia Brake Master Cylinder