OEM 2001 Toyota RAV4 Power Steering Pump

2001 Toyota RAV4 Parts Questions & Experts Answers

• Q: How to service and repair the power steering pump on 2001 Toyota RAV4?

  A: You should start the power steering pump servicing and repair by using Special Service Tool: 09249-63010 to compress the drive belt tensioner bracket clockwise so you can remove the RH engine under cover and drive belt. The service starts with wrenching the suction hose clip loose to disconnect the tube while avoiding drive belt fluid spillage. The subsequent step involves removing the union bolt and gasket for pressure feed tube disconnection before disconnecting the oil pressure switch connector. The PS vane pump assembly requires the Special Service Tool: 09249-63010 to loosen bolt A just enough before the removal of bolt B and the pump assembly. To install the mounting bolt A into the PS vane pump assembly users should position it for placement before applying Special Service Tool: 09248-63010 for bolt torquing to 30 Nm (305 kgf-cm, 22 ft. lbs.) using a torque wrench with 345 mm (13.58 inch) fulcrum length. Attach the pressure switch connector while safeguarding against oil contamination before attaching the pressure feed tube through its union bolt with a new gasket secured at 51.5 Nm (525 kgf-cm, 38 ft. lbs.). Start by attaching the suction hose to its clip before using Special Service Tool: 09249-63010 to flex the drive belt tensioner and holding the tension for at least 3 seconds before installing the drive belt. An essential step is to reinstall the RH engine under cover followed by power steering system bleeding.