OEM 2001 Toyota RAV4 Fuel Pressure Regulator

2001 Toyota RAV4 Parts Questions & Experts Answers

• Q: How to service the Fuel Pressure Regulator on 2001 Toyota RAV4?

  A: The service of the Fuel Pressure Regulator begins by taking out the fuel pump assembly and sender gauge from the fuel tank then separating the fuel suction plate. Begin by disconnecting the fuel sender gauge connector and ground plate before inserting two screwdrivers to remove the fuel suction plate with caution toward the suction support and fuel suction plate. As a next step disconnect the fuel pump connector. To access the fuel pressure regulator you should detach the fuel return jet tube from its clamp before pulling out the pressure regulator while removing the O-ring. Fitting a new O-ring on the pressure regulator requires light gasoline application to the ring before pushing it into place. Connect the fuel return jet tube to the clamp as the next step. The next operation involves fuel suction plate installation where you should first connect the fuel pump connector following its placement onto the fuel filter and fuel pump assembly and finally attach the fuel sender gauge connector and ground plate. For completion seal the fuel pump and sender gauge assembly into its proper position inside the fuel tank.