×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2001 Toyota MR2 Spyder Throttle Position Sensor
TPS Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Throttle Position Sensors found
2001 Toyota MR2 Spyder Throttle Position Sensor
Part Number: 89452-02020$60.07 MSRP: $84.32You Save: $24.25 (29%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor, Throttle Position; Position Sensor; Throttle Sensor; Sensor; Sensor, Throttle Position (For E.F.I.)
- Replaces: 89452-10040, 89452-20130
- Part Name Code: 89452
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.8 x 11.4 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89452-02020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2001 Toyota MR2 Spyder Throttle Position Sensor
Part Number: 89452-30150$89.57 MSRP: $125.74You Save: $36.17 (29%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor, Throttle Position; Position Sensor; Throttle Sensor; Sensor, Throttle Position (For E.F.I.)
- Part Name Code: 89452
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.8 x 11.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89452-30150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2001 Toyota MR2 Spyder Throttle Position Sensor
Looking for affordable OEM 2001 Toyota MR2 Spyder Throttle Position Sensor? Explore our comprehensive catalogue of genuine 2001 Toyota MR2 Spyder Throttle Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2001 Toyota MR2 Spyder Throttle Position Sensor Parts Q&A
- Q: How to replace the throttle position sensor and ensure proper adjustment on 2001 Toyota MR2 Spyder?A: The procedure to install a new throttle position sensor begins with removing the sensor along with its 2 set screws before attaching the new sensor. Adjust the throttle valve opening to 4 degrees while placing the sensor 15 degrees from its designated position to the left. Use a clockwise motion to move the sensor until it meets the throttle valve shaft before tightening the set screws briefly. Proceed to connect the throttle position sensor connector but prevent connection of the accelerator pedal position sensor connector and establish the toyota hand-held tester or obd II scan tool to the dlc3. Set the ignition switch to ON and observe the throttle valve opening percentage (throttle pos) from the current data screen during adjustment of the sensor to its central standard position. After positioning correctly tighten the screws to 2.0 N.m (20 kgf.cm, 18 in.lbf) torque specification. Ensure to confirm the throttle valve opening percentage while repeating adjustments if the result falls outside the defined range. Conduct a manual operation of the throttle valve which should demonstrate a percentage between 10 and 14 according to specifications. Tighten the screws to a torque of 2.0 N.m (20 kgf.cm, 18 in.lbf) before checking the throttle valve opening percentage once more. Re-adjust the sensor until the specifications are achieved. After adjustment of the sensor complete the process by painting the set screws and shutting off the ignition before detaching the toyota hand-held tester or obd II scan tool from the dlc3. Finish by disconnecting the throttle position sensor connector. To install the accelerator position sensor replace the 4 bolts and attach the sensor using the bolts while tightening them to 5.4 N.m (55 kgf.cm, 48 in.lbf). The inspection requires you to connect the sensor connector to the toyota hand-held tester or obd II scan tool with dlc3 and to turn the ignition switch ON without pressing the accelerator pedal. Check that the current data accel pos #1 (VPA) measures 0.3 - 0.9 V. Check the system operation after installing the throttle body.