×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM 2001 Toyota MR2 Spyder A/C Accumulator
Accumulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Accumulator found
2001 Toyota MR2 Spyder Dehydrator
Part Number: 88474-47010$72.83 MSRP: $102.24You Save: $29.41 (29%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Dryer, Cooler; A/C Receiver Drier; Drier Desiccant Element; Dryer, Air Conditioning; A/C Accumulator; Accumulator; Drier
- Item Weight: 0.90 Pounds
- Item Dimensions: 12.9 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88474-47010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2001 Toyota MR2 Spyder A/C Accumulator
Looking for affordable OEM 2001 Toyota MR2 Spyder A/C Accumulator? Explore our comprehensive catalogue of genuine 2001 Toyota MR2 Spyder A/C Accumulator. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2001 Toyota MR2 Spyder A/C Accumulator Parts Q&A
- Q: How to replace the A/C Accumulator on 2001 Toyota MR2 Spyder?A: The procedure to replace the dryer starts with using a 10 mm hexagon wrench to unfasten the modulator cap which reveals the filter. Remove the filter and the dryer from the modulator while keeping the dryer in its vinyl bag with the 2 layered section oriented upward. Follow this procedure by utilizing pliers to remove the dryer before inserting an alternative dryer into the modulator unit while keeping the vinyl bag undisturbed during installation and positioning the 2 layered part at the upper section. Put the filter inside the modulator so its small end points downward following the installation of the cap. Apply compressor oil (ND-OIL 8 or equivalent) to the O-rings and screw part before installing the caps by using a 10 mm hexagon wrench and final tightening them to 12.3 N.m (125 kgf.cm, 9 ft.lbf).