OEM 2001 Toyota Echo ABS Control Module

2001 Toyota Echo Parts Questions & Experts Answers

• Q: How to service the ABS Control Module for Antilock Brakes on 2001 Toyota Echo?

  A: The servicing process starts with disconnecting the ABS actuator assembly connector before removing the battery. Remove the engine room relay block No. 2 nuts after which set the block aside. Special Service Tool: 09023-00100 should be used for brake line detachment from the ABS actuator assembly where 6 brake lines will disconnect after achieving 15 Nm (155 kgf-cm, 11 ft. lbs.) of torque. Remove the ABS actuator assembly after disconnecting its 3 bolts which need to be tightened to 19 Nm (195 kgf-cm, 14 ft. lbs.). The ABS actuator demands removal of three nuts from the actuator bracket through 4.7 Nm (48 kgf-cm, 42 inch lbs.) torque before its detachment for complete access to its 3 holders. End the ABS actuator installation by removing its bolt and clamp while performing the procedure at 19 Nm (195 kgf-cm, 14 ft. lbs.). Install by performing the reverse procedures starting with adding brake fluid into the reservoir and bleeding the brake system before inspecting for any leakage points.