Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front Right; Air Bag Sensor; Sensor
Manufacturer Note: RH
Position: Front Passenger Side
Part Name Code: 89173
Item Weight: 0.80 Pounds
Item Dimensions: 4.4 x 2.7 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89173-19095
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2001 Toyota Corolla Submodels:
CE, LE, S, VE | 4 Cyl 1.8 L GAS
2001 Toyota Corolla Air Bag Sensor
Looking for affordable OEM 2001 Toyota Corolla Air Bag Sensor? Explore our comprehensive catalogue of genuine 2001 Toyota Corolla Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2001 Toyota Corolla Parts Questions & Experts Answers
Q: How to service and repair the side Air Bag sensor assembly on 2001 Toyota Corolla?
A: You should begin the removal of the side Air Bag sensor assembly for repair work by taking off the front door scuff plate and center pillar lower garnish. Start by removing the front seat outer belt retractor after first disconnecting its pretensioner connector then removing the retractor switch connector on the LH side before taking out the two securing bolts. Disengage the connector attached to the side Air Bag sensor while keeping the sensor assembly in place and then employ a T40 Torx wrench either Part No.09042-00020 or a local substitute tool to uninstall the four screws that hold the side Air Bag sensor. The sensor assembly connector must be connected when installed and must be properly torqued while also examining for any damage; replacement with a new sensor assembly should occur if the assembly shows physical damage or exhibits defects. Install the side Air Bag assembly with the 4 screws by applying torque through a Torx wrench (T40, Part No.09042-00020 or locally manufactured tool) to 20 N.m (205 kg.cm, 15 ft.lb) then place back the front seat outer belt retractor using 2 bolts with upper bolt torque of 4.9 N.m (50 kg.cm, 43 in.lb) and lower bolt torque of 41 N.m (420 kg.cm, 30 ft.lb). The LH side requires connection of both retractor switch connector and pretensioner connector. The last step involves putting back both the center pillar lower garnish and front door scuff plate.