Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front Right; Air Bag Sensor; Sensor
Manufacturer Note: RH
Position: Front Passenger Side
Part Name Code: 89173
Item Weight: 0.80 Pounds
Item Dimensions: 4.4 x 2.7 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89173-19095
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2000 Toyota Corolla Submodels:
CE, LE, S, VE | 4 Cyl 1.8 L GAS
2000 Toyota Corolla Air Bag Sensor
Looking for affordable OEM 2000 Toyota Corolla Air Bag Sensor? Explore our comprehensive catalogue of genuine 2000 Toyota Corolla Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2000 Toyota Corolla Air Bag Sensor Parts Questions & Experts Answers
Q: How to Service and Repair the Air Bag Sensor Assembly on 2000 Toyota Corolla?
A: The service and repair process for the Air Bag sensor assembly involves starting with the removal of front door scuff plate, center pillar lower garnish and front seat outer belt retractor after disconnecting pretensioner connector and (left-hand side only) retractor switch connector before extracting the two holding bolts. The next step involves disconnecting the connector from the side Air Bag sensor yet maintaining the sensor assembly in place and proceeding to uninstall the four screws with a T40 torx wrench (Part No.09042-00020 or locally manufactured tool). The sensor assembly connector needs installation while the sensor remains in place and subsequent torque application to specification as well as a damage check before new component installation when a dropped condition or defects are present. The T40 torx wrench is used for side Air Bag assembly installation followed by tightening the screws to 20 N.m (205 kgf.cm, 15 ft.lbf). The front seat outer belt retractor requires two bolt installation which requires 4.9 N.m (50 kgf.cm, 43 in.lbf) for the upper bolt and 41 N.m (420 kgf.cm, 30 ft.lbf) for the lower bolt. Lastly, connect the pretensioner connector with the retractor switch connector for the LH side. Complete the procedure by reattaching the front door scuff plate along with the center pillar lower garnish.