How to service the ABS Control Module for Antilock Brakes on 2001 Toyota Corolla?

Begin Hydraulic Control Assembly for Antilock Brakes service by first removing the connector then unfastening the brake lines using Special Service Tool: 09023-00100 at a torque of 15 Nm (155 kgf-cm, 11 ft. lbs.). Start the removal process by detaching the connector before unfastening three nuts on the ABS actuator assembly. Keep tension at 22 Nm (ivable torque factor) when removing the assembly. The installation process requires replying the order of brake line removal steps then refilling the brake reservoir with fluid before bleeding the system to check for any signs of leakage.

OEM 2001 Toyota Corolla ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 ABS Control Module found

View related parts
2001 Toyota Corolla Modulator Valve
Part Number: 44050-01030
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.3 x 7.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-01030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Corolla Submodels:
- CE, LE, S, VE | 4 Cyl 1.8 L GAS

2001 Toyota Corolla ABS Control Module

Looking for affordable OEM 2001 Toyota Corolla ABS Control Module? Explore our comprehensive catalogue of genuine 2001 Toyota Corolla ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Corolla Parts Questions & Experts Answers

Q: How to service the ABS Control Module for Antilock Brakes on 2001 Toyota Corolla?
A: Begin Hydraulic Control Assembly for Antilock Brakes service by first removing the connector then unfastening the brake lines using Special Service Tool: 09023-00100 at a torque of 15 Nm (155 kgf-cm, 11 ft. lbs.). Start the removal process by detaching the connector before unfastening three nuts on the ABS actuator assembly. Keep tension at 22 Nm (ivable torque factor) when removing the assembly. The installation process requires replying the order of brake line removal steps then refilling the brake reservoir with fluid before bleeding the system to check for any signs of leakage.