How to service and repair the ABS Control Module for Antilock Brakes on 2000 Toyota Corolla?

You should start the Hydraulic Control Assembly for Antilock Brakes repair by using the Special Service Tool: 09023-00100 to disconnect the connector and brake lines before separating the brake lines from the ABS actuator with 15 Nm (155 kgf-cm, 11 ft. lbs.) torque. Take off the ABS actuator assembly by detaching its connector then removing 3 nuts with a torque setting of 22 Nm (225 kgf-cm, 16 ft. lbs.). You should install the components in the opposite sequence of disassembly. Finally install brake fluid into the reservoir followed by bleeding the braking system while checking for possible leaks.

OEM 2000 Toyota Corolla ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 ABS Control Module found

View related parts
2000 Toyota Corolla Modulator Valve
Part Number: 44050-01030
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Hydraulic Assembly; ABS Control Module; Actuator
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.3 x 7.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-01030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Corolla Submodels:
- CE, LE, S, VE | 4 Cyl 1.8 L GAS

2000 Toyota Corolla ABS Control Module

Looking for affordable OEM 2000 Toyota Corolla ABS Control Module? Explore our comprehensive catalogue of genuine 2000 Toyota Corolla ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota Corolla Parts Questions & Experts Answers

Q: How to service and repair the ABS Control Module for Antilock Brakes on 2000 Toyota Corolla?
A: You should start the Hydraulic Control Assembly for Antilock Brakes repair by using the Special Service Tool: 09023-00100 to disconnect the connector and brake lines before separating the brake lines from the ABS actuator with 15 Nm (155 kgf-cm, 11 ft. lbs.) torque. Take off the ABS actuator assembly by detaching its connector then removing 3 nuts with a torque setting of 22 Nm (225 kgf-cm, 16 ft. lbs.). You should install the components in the opposite sequence of disassembly. Finally install brake fluid into the reservoir followed by bleeding the braking system while checking for possible leaks.