Other Name: Motor, Cooling Fan; Engine Cooling Fan Motor, Left, Right; Dual Radiator Condenser Fan Assembly; Cooling Fan Assembly; Motor; Engine Cooling Fan Motor; Cooling Fan Motor
Manufacturer Note: MARK 16363-74370
Replaces: 16363-03100
Part Name Code: 16363A
Item Weight: 2.50 Pounds
Item Dimensions: 4.2 x 4.3 x 5.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 16363-74370
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
Base, CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
LE, SE, XLE | 6 Cyl 3.0 L GAS
2001 Toyota Camry Fan Motor
Looking for affordable OEM 2001 Toyota Camry Fan Motor? Explore our comprehensive catalogue of genuine 2001 Toyota Camry Fan Motor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2001 Toyota Camry Parts Questions & Experts Answers
Q: How to service and repair the radiator cooling fan motor on 2001 Toyota Camry?
A: The radiator cooling fan motor repair process starts with unbolting the No.1 cooling fan by first draining the engine coolant and unhooking the upper radiator hose from the radiator and the cooling fan connector and ECT switch connector. Disconnect the radiator cooling fan by removing its 2 bolts until it separates from the radiator then proceed to disconnect the wire and holder from the fan shroud before uninstalling the cooling fan. To remove the No.2 cooling fan start by disconnecting its connector then remove two bolts. The disassembly process starts by taking out the fan and its nut then proceeding with No.2 cooling fan by removing the 2 screws and the motor cover followed by disconnecting the wire along with the connector holder from the fan shroud until all 3 screws are removed to extract the fan motor. To reinstall the components begin with the 3 screws that secure the fan motor after which add the wire and connector holder to the fan shroud and end assembly with motor cover screws along with the fan nut. The sequence for No.1 cooling fan installation involves connecting the lower cooling fan area to the radiator bracket followed by attaching the fan using two bolts that need to be tightened to 5.0 Nm (50 kgf-cm, 44 inch lbs.). Next, mount the ECT switch wire and connector holder onto the fan shroud before connecting both the fan connector and ECT switch connector. The radiator receives an attached upper hose while the system receives coolant before an engine start to verify there are no leaks. The lower side of the No.2 cooling fan attaches to the radiator bracket after which the cooling fan installation requires two bolts tightened to 5.0 Nm (50 kgf-cm, 44 inch lbs.). The cooling fan connector must be joined.