How to Service and Repair the ABS Control Module in Antilock Brakes on 2001 Toyota Camry?

Start Hydraulic Control Assembly for Antilock Brakes service and repair operations by taking out the right front fender liner and the A/C tube clamp bracket bolt. Use Special Service Tool: 09751-36011 to disconnect the 6 brake lines from the ABS & TRAC actuator by detaching them from the actuator and torque the 10 mm nut to 15 Nm (155 kgf-cm, 11 ft. lbs.) while torquing the 12 mm nut to 20 Nm (200 kgf-cm, 14 ft. lbs.). The ABS & TRAC actuator assembly needs installation after you disconnect its two connectors and remove all four screws and nuts while torquing them to 19 Nm (195 kgf-cm, 14 ft. lbs.). Start by unfastening the ABS & TRAC actuator with the removal of its 2 nuts before separating it from the actuator bracket that requires 5.4 Nm (55 kgf-cm, 48 inch lbs.) torque. Finish by taking away the 2 holders alongside the 3 cushions from the actuator. Reinstallation begins by performing the opposite order of removal while post-installation requires brake fluid addition to the reservoir and completion of brake bleeding followed by leak checks.

OEM 2001 Toyota Camry ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 ABS Control Modules found

View related parts
2001 Toyota Camry Modulator Valve
Part Number: 44050-33030
$690.75 MSRP: $869.52
You Save: $178.77 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator Assembly; Actuator; Actuator Assembly, ABS & Traction
- Part Name Code: 44540
- Item Weight: 6.00 Pounds
- Item Dimensions: 8.3 x 7.1 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-33030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Actuator Assembly, Brake
Part Number: 44050-33020
Product Specifications
- Other Name: ABS Control Module
- Replaces: 44510-33070
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.8 x 8.0 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-33020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Control Module
Part Number: 89540-33070
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer Assembly, Skid Control
- Manufacturer Note: W(TRACTION CONTROL)
- Part Name Code: 89540
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.5 x 6.5 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-33070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Control Module
Part Number: 89540-33080
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer Assembly, Skid Control
- Part Name Code: 89540
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.6 x 6.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-33080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Modulator Valve
Part Number: 44050-06041
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.1 x 7.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-06041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2001 Toyota Camry Control Module
Part Number: 89540-33200
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer Assembly, Skid Control
- Part Name Code: 89540
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.3 x 6.5 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-33200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS

2001 Toyota Camry ABS Control Module

Looking for affordable OEM 2001 Toyota Camry ABS Control Module? Explore our comprehensive catalogue of genuine 2001 Toyota Camry ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2001 Toyota Camry Parts Questions & Experts Answers

Q: How to Service and Repair the ABS Control Module in Antilock Brakes on 2001 Toyota Camry?
A: Start Hydraulic Control Assembly for Antilock Brakes service and repair operations by taking out the right front fender liner and the A/C tube clamp bracket bolt. Use Special Service Tool: 09751-36011 to disconnect the 6 brake lines from the ABS & TRAC actuator by detaching them from the actuator and torque the 10 mm nut to 15 Nm (155 kgf-cm, 11 ft. lbs.) while torquing the 12 mm nut to 20 Nm (200 kgf-cm, 14 ft. lbs.). The ABS & TRAC actuator assembly needs installation after you disconnect its two connectors and remove all four screws and nuts while torquing them to 19 Nm (195 kgf-cm, 14 ft. lbs.). Start by unfastening the ABS & TRAC actuator with the removal of its 2 nuts before separating it from the actuator bracket that requires 5.4 Nm (55 kgf-cm, 48 inch lbs.) torque. Finish by taking away the 2 holders alongside the 3 cushions from the actuator. Reinstallation begins by performing the opposite order of removal while post-installation requires brake fluid addition to the reservoir and completion of brake bleeding followed by leak checks.