How to service and repair the ABS Control Module for Antilock Brakes (ABS TMC/Denso Made) on 2000 Toyota Camry?

Service and repair procedures on the Hydraulic Control Assembly for Antilock Brakes (ABS TMC/Denso Made) start with removing the right front fender liner followed by the A/C tube clamp bracket bolt removal. Remove the 6 brake lines from the ABS actuator by using Special Service Tool: 09751-36011 while securing each line with 15 Nm (155 kgf-cm, 11 ft. lbs.) of torque. Proceed by separating the two connectors while uninstalling the two bolts and two nuts keeping the torque at 19 Nm (195 kgf-cm, 14 ft. lbs.). The next step should involve removing the ABS actuator through a careful extraction of 2 nuts from the actuator bracket that requires precise torque of 5.4 Nm (55 kgf-cm, 48 inch lbs.) followed by complete removal of 2 holders and 3 cushions from the ABS actuator. Installation begins with performing removal steps in reverse order followed by brake fluid fill up of the reservoir and subsequent bleeding of the brake system before leak checks are conducted.

OEM 2000 Toyota Camry ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 ABS Control Modules found

View related parts
2000 Toyota Camry Modulator Valve
Part Number: 44050-33030
$690.75 MSRP: $869.52
You Save: $178.77 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator Assembly; Actuator; Actuator Assembly, ABS & Traction
- Part Name Code: 44540
- Item Weight: 6.00 Pounds
- Item Dimensions: 8.3 x 7.1 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-33030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Actuator Assembly, Brake
Part Number: 44050-33020
Product Specifications
- Other Name: ABS Control Module
- Replaces: 44510-33070
- Part Name Code: 44510
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.8 x 8.0 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-33020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Control Module
Part Number: 89540-33070
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer Assembly, Skid Control
- Manufacturer Note: W(TRACTION CONTROL)
- Part Name Code: 89540
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.5 x 6.5 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-33070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Control Module
Part Number: 89540-33080
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer Assembly, Skid Control
- Part Name Code: 89540
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.6 x 6.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-33080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Modulator Valve
Part Number: 44050-06041
Product Specifications
- Other Name: Actuator Assembly, Brake; ABS Modulator Valve; ABS Control Module; Actuator
- Part Name Code: 44510
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.1 x 7.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44050-06041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Control Module
Part Number: 89540-33200
Product Specifications
- Other Name: Computer Assembly, Skid; ABS Control Module; Computer Assembly, Skid Control
- Part Name Code: 89540
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.3 x 6.5 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89540-33200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS

2000 Toyota Camry ABS Control Module

Looking for affordable OEM 2000 Toyota Camry ABS Control Module? Explore our comprehensive catalogue of genuine 2000 Toyota Camry ABS Control Module. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota Camry Parts Questions & Experts Answers

Q: How to service and repair the ABS Control Module for Antilock Brakes (ABS TMC/Denso Made) on 2000 Toyota Camry?
A: Service and repair procedures on the Hydraulic Control Assembly for Antilock Brakes (ABS TMC/Denso Made) start with removing the right front fender liner followed by the A/C tube clamp bracket bolt removal. Remove the 6 brake lines from the ABS actuator by using Special Service Tool: 09751-36011 while securing each line with 15 Nm (155 kgf-cm, 11 ft. lbs.) of torque. Proceed by separating the two connectors while uninstalling the two bolts and two nuts keeping the torque at 19 Nm (195 kgf-cm, 14 ft. lbs.). The next step should involve removing the ABS actuator through a careful extraction of 2 nuts from the actuator bracket that requires precise torque of 5.4 Nm (55 kgf-cm, 48 inch lbs.) followed by complete removal of 2 holders and 3 cushions from the ABS actuator. Installation begins with performing removal steps in reverse order followed by brake fluid fill up of the reservoir and subsequent bleeding of the brake system before leak checks are conducted.