How to service the Crankshaft Position Sensor on 2000 Toyota Sienna?

The first step to service the Crankshaft Position Sensor begins by taking off the RH fender apron seal. Start by uninstalling the crankshaft position sensor after unbolt the sensor and disconnect its wiring interface while tightening the bolt to 8 Nm (80 kg.cm, 69 in. lb). After that disconnect the cable that connects to the sensor. You should complete sensor installation by proceeding backward from removal steps.

OEM 2000 Toyota Sienna Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2000 Toyota Sienna Crankshaft Position Sensor
Part Number: 90080-19009
$77.72 MSRP: $109.10
You Save: $31.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Crankshaft Position Sensor; RPM Sensor, Engine Management; Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05012
- Part Name Code: 15100R
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90080-19009
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Sienna Submodels:
- CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2000 Toyota Sienna Crankshaft Position Sensor

Looking for affordable OEM 2000 Toyota Sienna Crankshaft Position Sensor? Explore our comprehensive catalogue of genuine 2000 Toyota Sienna Crankshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota Sienna Parts Questions & Experts Answers

Q: How to service the Crankshaft Position Sensor on 2000 Toyota Sienna?
A: The first step to service the Crankshaft Position Sensor begins by taking off the RH fender apron seal. Start by uninstalling the crankshaft position sensor after unbolt the sensor and disconnect its wiring interface while tightening the bolt to 8 Nm (80 kg.cm, 69 in. lb). After that disconnect the cable that connects to the sensor. You should complete sensor installation by proceeding backward from removal steps.

Related 2000 Toyota Sienna Parts

Alternate Year Models

1999 Toyota Sienna Crankshaft Position Sensor 2001 Toyota Sienna Crankshaft Position Sensor