OEM 2000 Toyota Corolla Starter Motor

2000 Toyota Corolla Parts Questions & Experts Answers

• Q: How to service and repair the starter motor on 2000 Toyota Corolla?

  A: Service and repair of the starter motor starts with taking out the battery and tray then moving to the engine coolant reservoir where you detach the reservoir hose from the radiator before removing its 2 securing nuts. Begin by extracting the RH engine under cover and wire clamp then disconnect the starter connector and remove the nut and starter wire before uninstalling its 2 retaining bolts. Begin installation of the starter by placing the 2 bolts first while you need to connect the starter wire before installing the nut and after that connect the starter connector. It ends with replacing the wire clamp and RH engine under cover followed by installing the radiator reservoir then completing the process by installing the battery along with its tray. There are two bolt lengths used within this assembly with A receiving bolts that measure 64 mm (2.72 in.) and B using shorter bolts that measure 54 mm (2.13 in.).