How to service and repair the Air Bag sensor assembly on 2000 Toyota Camry?

Service and repair of the Air Bag sensor assembly should start with front door scuff plate removal and center pillar lower garnish dismantling followed by front seat outretractor belt bolt remover. The pretensioner connector must be disconnected during this time. You must first disconnect the side Air Bag sensor assembly connector which stays installed before removing the three screws and assembly with a T40 torx wrench (Part No.09042-00020 or locally manufactured tool). You should install the new side Air Bag sensor assembly with the T40 torx wrench by fastening the three screws to 20 Nm (205 kg.cm, 15 ft.lb) tightening torque and then connect the sensor assembly connector while making sure the SRS wiring stays clear of interference or pinches. Inspect the sensor assembly stability by shaking it immediately after completing installation. Fasten the front seat outer belt retractor using two bolts at 7.5 Nm (76 kg.cm, 66 in.lb) for the upper bolt and 42 Nm (430 kg.cm, 31 ft.lb) for the lower bolt before reattaching the pretensioner connector. The last installation steps include putting back the front door scuff plate along with the center pillar lower garnish. New SRS components should always be utilized because side Air Bag sensor assemblies from accidental impacts must be discarded while avoiding any attempt at repairing sensors for retrospective use.

OEM 2000 Toyota Camry Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Sensors found

View related parts
2000 Toyota Camry Side Impact Sensor, Driver Side
Part Number: 89835-33020
$226.07 MSRP: $277.24
You Save: $51.17 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Door Side Air Bag; Air Bag Sensor; Side Sensor; Sensor, Door Side Air Bag, Driver Side
- Position: Driver Side
- Part Name Code: 89835
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89835-33020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Front Sensor, Driver Side
Part Number: 89174-39065
$98.82 MSRP: $119.14
You Save: $20.32 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front Left, Left; Air Bag Sensor; Sensor, Air Bag, Front Driver Side; Sensor, Air Bag
- Position: Front Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.8 x 3.0 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89174-39065
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Impact Sensor, Front Passenger Side
Part Number: 89173-39195
$98.82 MSRP: $119.14
You Save: $20.32 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Bag, Front; Air Bag Impact Sensor, Front Right, Right; Air Bag Sensor; Front Sensor; Sensor, Air Bag, Front Passenger Side
- Position: Front Passenger Side
- Replaces: 89173-09240
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.7 x 3.0 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89173-39195
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Side Impact Sensor, Passenger Side
Part Number: 89860-33030
$194.78 MSRP: $238.88
You Save: $44.10 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Right; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side
- Position: Passenger Side
- Part Name Code: 89860
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89860-33030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Side Impact Sensor, Rear
Part Number: 89860-06020
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89860-06020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Side Impact Sensor, Rear
Part Number: 89860-06010
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Rear; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Passenger Side; Sensor Assembly, Side Air Bag, Driver Side
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.3 x 2.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89860-06010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2000 Toyota Camry Side Impact Sensor, Driver Side
Part Number: 89830-33030
Product Specifications
- Other Name: Sensor Assembly, Side Air Bag; Air Bag Impact Sensor, Left; Air Bag Sensor; Side Sensor; Sensor Assembly, Side Air Bag, Driver Side
- Position: Driver Side
- Part Name Code: 89860A
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.4 x 2.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89830-33030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2000 Toyota Camry Submodels:
- CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS

2000 Toyota Camry Air Bag Sensor

Looking for affordable OEM 2000 Toyota Camry Air Bag Sensor? Explore our comprehensive catalogue of genuine 2000 Toyota Camry Air Bag Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2000 Toyota Camry Parts Questions & Experts Answers

Q: How to service and repair the Air Bag sensor assembly on 2000 Toyota Camry?
A: Service and repair of the Air Bag sensor assembly should start with front door scuff plate removal and center pillar lower garnish dismantling followed by front seat outretractor belt bolt remover. The pretensioner connector must be disconnected during this time. You must first disconnect the side Air Bag sensor assembly connector which stays installed before removing the three screws and assembly with a T40 torx wrench (Part No.09042-00020 or locally manufactured tool). You should install the new side Air Bag sensor assembly with the T40 torx wrench by fastening the three screws to 20 Nm (205 kg.cm, 15 ft.lb) tightening torque and then connect the sensor assembly connector while making sure the SRS wiring stays clear of interference or pinches. Inspect the sensor assembly stability by shaking it immediately after completing installation. Fasten the front seat outer belt retractor using two bolts at 7.5 Nm (76 kg.cm, 66 in.lb) for the upper bolt and 42 Nm (430 kg.cm, 31 ft.lb) for the lower bolt before reattaching the pretensioner connector. The last installation steps include putting back the front door scuff plate along with the center pillar lower garnish. New SRS components should always be utilized because side Air Bag sensor assemblies from accidental impacts must be discarded while avoiding any attempt at repairing sensors for retrospective use.