Other Name: Sensor, Speed, Front Right-Hand; ABS Wheel Speed Sensor, Front Right; ABS Sensor; Front Speed Sensor; ABS Sensor Wire; Sensor, Speed, Front Passenger Side; ABS Wheel Speed Sensor
Position: Front Passenger Side
Part Name Code: 89542
Item Weight: 1.20 Pounds
Item Dimensions: 2.0 x 5.6 x 7.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 89542-35050
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2000 Toyota 4Runner Submodels:
Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
2000 Toyota 4Runner Speed Sensor
Looking for affordable OEM 2000 Toyota 4Runner Speed Sensor? Explore our comprehensive catalogue of genuine 2000 Toyota 4Runner Speed Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2000 Toyota 4Runner Parts Questions & Experts Answers
Q: How to service and repair the front speed sensor on 2000 Toyota 4Runner?
A: Service and repair operations for the front speed sensor start with disconnecting its connector. Begin by removing 4 resin clips and 3 clamp bolts which secure the sensor harness to the steering knuckle and upper arm and side rail but apply 8.0 Nm (82 kgf-cm, 71 inch lbs.) torque for the steering knuckle and upper arm. Then apply 12 Nm (122 kgf-cm, 9 ft. lbs.) torque for the side rail. You must remove the speed sensor installation bolt from the steering knuckle maintaining a torque of 8.0 Nm (82 kgf-cm, 71 inch lbs.). The installation process requires the backward execution of the removal steps. One must check the speed sensor signal post-installation by confirming the sensor surface is flat against the knuckle and free from foreign materials while using new resin clips for installation.