2004 Toyota Solara Airbag, Clock Spring, Air Bag Sensor

Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2004 Toyota Solara

• Q: How to replace the Clock Spring Assembly / Spiral Cable on 2004 Toyota Solara?

  A: In order to replace the Clock Spring Assembly, make sure that the front wheels are straight and disconnect battery. Take off steering wheel cover, horn button and steering wheel with special tools. Examine the clock spring to see whether it is damaged, reinsert it, and adjust it. Lastly, re-fit the steering wheel and the battery.
• Q: How to replace the Air Bag Sensor Rear LH on 2004 Toyota Solara?

  A: In order to change the Air Bag Sensor Rear LH, be sure that the ignition is switch off and the battery is disconnected. Unscrew the sensor and remove the necessary parts, and screw a new sensor in, making sure that the wiring is correct. Connect the battery again and test the SRS warning light. Change the sensor in case it is broken.
• Q: What are the crucial steps for initializing the Airbag occupant classification ECU after a collision on 2004 Toyota Solara?

  A: Under some conditions, like replacing and repairing the ECU, it is necessary to initialize the occupant classification ECU after a collision occurred. Perform diagnostic tests and physical inspection of the damage on different Air Bag assemblies and sensors and make sure to replace any deployed parts. Check the connectors and the wire harnesses, too, to see whether they are damaged.