2003 Toyota Corolla Airbag, Clock Spring, Air Bag Sensor

Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2003 Toyota Corolla

• Q: How to conduct repairs and inspections of the Airbag system after a collision on 2003 Toyota Corolla?

  A: After a collision, thorough repairs and inspections of the Air Bag system are essential. Check the diagnostic system and visually inspect for damage in vehicles not involved in a collision. In vehicles where the Air Bag is deployed, follow diagnostic checks and inspect for damage to connectors and wire harnesses.
• Q: How to service and repair the front Air Bag sensor on 2003 Toyota Corolla?

  A: When servicing and repairing the front Air Bag sensor, the front and side Air Bag sensors can be disconnected by sliding the outer outward in the direction indicated. Un screw them and let go of the lock. To reconnect, position the connectors and press until they snap, making sure that the outer is in the same position as before.
• Q: How to replace the Clock Spring Assembly / Spiral Cable on 2003 Toyota Corolla?

  A: To check replacing the Clock Spring Assembly, remove the battery negative terminal, remember to keep the front wheels straight. Take off the steering wheel assemblies, horn button, and the clock spring sub-assembly. Check the damages and change where required. Install the new clock spring, centre and refit the parts. Lastly, check the horn button and SRS warning light.