My Garage
Cart
Make sure this part fits

Toyota 46590-33020
Parking Brake, Driver Side

1995-2009 Toyota 4659033020

Customer Questions & Expert Answers (9)
Toyota 46590-33020 Parking Brake, Driver Side
Toyota 46590-33020 Parking Brake, Driver Side
  • Part Description
    Shoe Assembly, Parking Brake; Parking Brake Shoe
  • Part Name Code
    46590
  • Position
    Driver Side
  • Replaces
    46590-20060, 46590-07010
  • Manufacturer
    Toyota
Make sure this part fits
$36.01 MSRP: $50.11
You Save: $14.10 (29%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code46590
    Manufacturer Part Number46590-33020
    Part DescriptionShoe Assembly, Parking Brake; Parking Brake Shoe
    Other NamesShoes; Shoe Assembly, Parking Brake, Driver Side
    Item Dimensions13.7 x 5.2 x 2.7 inches
    Item Weight1.20 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces46590-20060, 46590-07010
    ManufacturerToyota
    SKU46590-33020
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2009 Toyota CamryBase, CE, Hybrid, LE, SE, XLE4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
    1995-1999 Toyota CelicaGT, ST4 Cyl 1.8 L GAS, 4 Cyl 2.2 L GAS
    2001-2003 Toyota HighlanderBase, Limited4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will 46590-33020 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 46590-33020 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What should be checked after installing all parts for the 2002 Toyota Camry? Posted by Customer
    A:
    Check that all parts are properly installed, ensuring no oil or grease is on the friction surfaces.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    What steps are involved in removing the rear shoe for the 2001 Toyota Camry? Posted by Customer
    A:
    Slide it out, remove the tension spring, shoe hold-down spring cups, spring, and pin, and disconnect the parking brake cable from the parking brake shoe lever using needle-nose pliers.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    What is the first step to overhaul the parking brake assembly for the 2005 Toyota Camry? Posted by Customer
    A:
    Begin by removing the rear wheel and separating the rear disc brake caliper assembly LH by removing the 2 bolts without disconnecting the flexible hose.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    What should you inspect after disassembling the parts for the 2000 Toyota Camry? Posted by Customer
    A:
    Inspect all disassembled parts for wear, rust, or damage, measure the brake shoe lining thickness (standard: 2.0 mm, minimum: 1.0 mm), and check the disc inside diameter (standard: 170 mm, maximum: 171 mm).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    How do you check the thickness of the shoe lining for the 2003 Toyota Camry? Posted by Customer
    A:
    Measure the thickness of the shoe lining with a ruler, ensuring it is at least 1.0 mm (0.039 inch); if it is at the minimum or shows severe wear, replace the brake shoe.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    How do you finalize the installation of the parking brake assembly for the 2003 Toyota Highlander? Posted by Customer
    A:
    Install the parking brake shoe strut LH, compression spring, and return tension springs using needle-nose pliers, verify that all parts are properly installed, ensuring no oil or grease is on the friction surfaces.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    How do you check for brake drag for the 2002 Toyota Highlander? Posted by Customer
    A:
    Check for brake drag, then install the hole plug.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Shoe
    Q:
    What is the first step to overhaul the parking brake shoe for the 2001 Toyota Highlander? Posted by Customer
    A:
    Begin by removing the rear wheel and separating the rear disc brake caliper assembly LH without disconnecting the flexible hose.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Parking Brake Shoe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 46590-33020, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 46590-33020 Parking Brake, Driver Side. It is sometimes referred to as Toyota Brake Shoe Set, Toyota Parking Brake Shoe. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4659033020 Parking Brake, Driver Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery