Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 44204-0C011
Rack, Front

2003-2007 Toyota 442040C011

Customer Questions & Expert Answers (10)
Toyota 44204-0C011 Rack, Front
  • Part Description
    Rack Sub-Assembly, Power; Rack And Pinion Rack Gear, Front; Steering Gearbox; Steering Rack
  • Part Name Code
    44204
  • Position
    Front
  • Manufacturer
    Toyota
Make sure this part fits
$580.35 MSRP: $850.51
You Save: $270.16 (32%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 44204-0C011 Rack, Front is Ref No. 21 in the diagram below

    2004 Toyota Tundra Rack, Front Diagram for 44204-0C011
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 44204-0C011

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code44204
    Manufacturer Part Number44204-0C011
    Part DescriptionRack Sub-Assembly, Power; Rack And Pinion Rack Gear, Front; Steering Gearbox; Steering Rack
    Other NamesRack Sub-Assembly, Power Steering
    Item Dimensions32.1 x 3.3 x 2.8 inches
    Item Weight5.70 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU44204-0C011
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Toyota SequoiaLimited, SR58 Cyl 4.7 L GAS
    2003-2006 Toyota TundraBase, Limited, SR56 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

  • Customer Questions & Expert Answers

    Q:
    Will 44204-0C011 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 44204-0C011 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the next step after reconnecting the clamp plate for the 2003 Toyota Sequoia? Posted by Customer
    A:
    Reconnect the No. 2 intermediate shaft assembly and the RH and LH tie rod ends.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Rack And Pinion
    Q:
    What should be done after installing the control valve assembly for the 2006 Toyota Sequoia? Posted by Customer
    A:
    Align matchmarks and tighten bolts to specified torque values.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Rack And Pinion
    Q:
    How should the front wheels be positioned before starting the repair for the 2007 Toyota Sequoia? Posted by Customer
    A:
    Ensure the front wheels are facing straight ahead.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Rack And Pinion
    Q:
    What tools are needed to unstake the claw washers for the 2004 Toyota Sequoia? Posted by Customer
    A:
    Use a screwdriver and hammer to unstake the claw washers.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Rack And Pinion
    Q:
    How do you disconnect the pressure feed and return tubes for the 2005 Toyota Sequoia? Posted by Customer
    A:
    Use Special Service Tool: 09023-12701.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Rack And Pinion
    Q:
    What should be ensured when using the torque wrench for the pressure tubes for the 2005 Toyota Tundra? Posted by Customer
    A:
    Ensure the torque wrench has a fulcrum length of 300 mm (11.81 inch) and that the tool is parallel to the wrench.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Rack And Pinion
    Q:
    What is the next component to disconnect after the tie rod ends for the 2003 Toyota Tundra? Posted by Customer
    A:
    Disconnect the No. 2 intermediate shaft assembly and the clamp plate by removing the bolt.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Rack And Pinion
    Q:
    What is the next component to disconnect after the tie rod ends for the 2006 Toyota Tundra? Posted by Customer
    A:
    Disconnect the No. 2 intermediate shaft assembly and the clamp plate by removing the bolt.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Rack And Pinion
    Q:
    What is the first step to disassemble the steering gear for the 2004 Toyota Tundra? Posted by Customer
    A:
    Do not overtighten the vise.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Rack And Pinion
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 44204-0C011, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 44204-0C011 Rack, Front. It is sometimes referred to as Toyota Rack And Pinion. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 442040C011 Rack, Front. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery