Toyota 81550-02450
Combination Lamp Assy, Passenger Side

Begin by removing the rear combination light gasket before you start the disassembly process because the old gasket needs complete removal to avoid water leakage while installing a new gasket. The guide should be disengaged first before extracting the rear turn signal light bulb by rotating its group with the rear combination light socket and wire until they separate from the bulb. To access the Back Up light bulb disconnect both the rear combination light socket and wire by turning them in a specific direction as a single unit before separating the bulb from its socket. The tail and stop light bulb along with its rear combination light socket and wire need to be turned in a specific direction before getting removed as one piece then the bulb needs separating from the wire. Using the claw system detach the rear combination light socket together with its wire from the rear combination light lens and body.

Engage the claw and install the rear combination light socket and wire to the rear combination light lens and body.