Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 12371-0F060
Rear Mount

2007-2009 Toyota 123710F060

Customer Questions & Expert Answers (6)
Toyota 12371-0F060 Rear Mount
Toyota 12371-0F060 Rear Mount
Toyota 12371-0F060 Rear Mount
  • Part Description
    Insulator, Engine Mounting; Automatic Transmission Mount; Engine Mount Bracket; Motor Mount
  • Part Name Code
    12371
  • Manufacturer
    Toyota
Make sure this part fits
$104.98 MSRP: $147.36
You Save: $42.38 (29%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • 2008 Toyota Tundra Rear Mount Diagram for 12371-0F060
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12371-0F060

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code12371
    Manufacturer Part Number12371-0F060
    Part DescriptionInsulator, Engine Mounting; Automatic Transmission Mount; Engine Mount Bracket; Motor Mount
    Other NamesInsulator, Engine Mounting, Rear
    Item Dimensions15.3 x 11.6 x 5.2 inches
    Item Weight0.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU12371-0F060
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2009 Toyota SequoiaLimited, Platinum, SR58 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
    2007-2009 Toyota TundraBase, Limited, SR58 Cyl 4.7 L GAS

  • Customer Questions & Expert Answers

    Q:
    Is 12371-0F060 a good match for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 12371-0F060 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to service and repair the rear Engine Mount on Toyota Tundra? Posted by Customer
    A:
    The first step of servicing or repairing the rear engine mounting involves using a transmission jack for supporting the automatic transmission assembly at the crossmember. Then, raise the automatic transmission assembly slightly away from the crossmember. Start by disconnecting the 4 bolts of the rear No. 3 engine mounting insulator and proceed with removing 4 nuts, 4 bolts, 4 plate washers and finally the crossmember. You need to remove the rear No. 1 engine mounting insulator from the transmission by breaking its holding bolts. Repetition of the installation process requires the transmission jack to hold the automatic transmission assembly slightly above the crossmember position. Secure the rear No. 1 engine mounting insulator to the transmission by using the 4 bolts with proper torquing to 40 N m (408 kgf cm, 30 ft.lbf). Place the engine rear mounting insulator first while using 4 bolts that require 16 N m (63 kgf cm, 12 ft. lbf) torque before adding 4 bolts and 4 plate washers and 4 nuts with a torque of 110 N m (1122 kgf cm, 81 ft. lbf).
    Posted by ToyotaPartsNow Specialist
    Q:
    How to install the rear Engine Mount on Toyota Tundra? Posted by Customer
    A:
    Begin installation of the rear engine mounting after you support the automatic transmission assembly with a transmission jack which lifts it gently from the crossmember. The rear No. 1 engine mounting insulator must be installed to the transmission with 4 bolts while achieving 40 Nm (408 kgf-cm, 30 ft-lbf) of torque. Use 4 bolts to connect the engine rear mounting insulator with the No. 3 frame crossmember sub-assembly and torque them to 16 Nm (63 kgf-cm, 12 ft-lbf). Fasten together the frame crossmember by running four bolts and four plate washers and four nuts while tightening them to 110 Nm (1122 kgf-cm, 81 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    Q:
    How do you remove the front No. 2 engine mounting bracket LH for the 2007 Toyota Tundra? Posted by Customer
    A:
    Take out the bolt and bracket.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Engine Mount
    Q:
    What do you need to do to remove the left-hand side front engine mounting insulator for the 2009 Toyota Tundra? Posted by Customer
    A:
    Take off the nut and two bolts before removing the insulator.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you install the rear No. 1 engine mounting insulator for the 2008 Toyota Tundra? Posted by Customer
    A:
    Install it to the transmission with 4 bolts, ensuring a torque of 40 Nm (408 kgf-cm, 30 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 12371-0F060, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 12371-0F060 Rear Mount. It is sometimes referred to as Toyota Engine Mount. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 123710F060 Rear Mount. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery