OEM Toyota part with Part Number 89620-12270 Igniter, Driver Side known as Toyota Igniter, Ignition Control Module component provides maximum durability and optimal performance. The certified Toyota dealership components feature a warranty protection for 12-month, 12,000-mile usage. The use of OEM part 89620-12270 Igniter, Driver Side enables maintenance standards that match the original factory installation quality. The specific item serves the following model series: 1988 Toyota 4Runner and 1988-1989 Toyota MR2.
Genuine Toyota offers this high-quality Igniter Assembly; Ignition Control Module under manufacturer part number 89620-12270 for use in the Driver Side. This product identification code consists of 89620 which proves its manufacturer as Toyota. This component features dimensions of 3.2 x 2.3 x 1.2 inches and weighs 0.90 Pounds. This component 8962012270 is specially constructed for vehicle fitting requirements within the Direct Replacement classification. Each vehicle requires the component which has an identified SKU of 89620-12270. The factory-warranty from Toyota guarantees continuous reliable operation and high performance for this part 89620-12270. The Shipping Policy and Return Policy pages provide full details about shipping procedures and return instructions.
The Toyota part 89620-12270 Igniter, Driver Side functions as an important component of the ignition system which delivers both performance stability and reliability. The line source power voltage requires regular maintenance through voltmeter tests with positive probe attachment to the ignition coil positive terminal and negative probe grounded to the chassis for a proper 12-volt measurement during an on ignition switch status. In case voltage is missing the igniter circuit should be investigated for weaknesses. When checking the igniter power transistor one must follow the identical approach by placing the positive probe onto the ignition coil negative terminal. Replacement of the igniter becomes necessary when the voltage measurement stands outside the designated level. A functional assessment can be performed by disconnecting the ignition coil wiring connector and installing a 3 to 5-volt dry cell battery to the pink and white wire terminals but only apply 5 volts and limit the exposure to five seconds. The ignition coil negative terminal must receive 7 to 10 volts in order to determine if the igniter needs replacement. You can easily install the Toyota part 89620-12270 Igniter, Driver Side by following a sequence of steps that will lead to proper alignment. The Toyota part 89620-12270 Igniter, Driver Side joins a wide range of OEM Toyota car parts on ToyotaPartsNow.com which are both warrantied by manufacturers directly and obtainable under a fully refundable return policy.