OEM Toyota part with Part Number 04479-28090 Caliper Overhaul Kit, Rear known as Toyota Wheel Cylinder, Wheel Cylinder Repair Kit component provides maximum durability and optimal performance. The certified Toyota dealership components feature a warranty protection for 12-month, 12,000-mile usage. The use of OEM part 04479-28090 Caliper Overhaul Kit, Rear enables maintenance standards that match the original factory installation quality. The specific item serves the following model series: 2004-2010 Toyota Sienna.
Genuine Toyota offers this high-quality Cylinder Kit, Rear Disc Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit under manufacturer part number 04479-28090 for use in the Rear. This component weighs 0.50 Pounds. This component 0447928090 is specially constructed for vehicle fitting requirements. This product could replace 04479-28120, 04479-28170, 04479-28150. Each vehicle requires the component which has an identified SKU of 04479-28090. The factory-warranty from Toyota guarantees continuous reliable operation and high performance for this part 04479-28090. The Shipping Policy and Return Policy pages provide full details about shipping procedures and return instructions.
A braking system functions with peak performance and safety through the Toyota Part Number 04479-28090 which carries the Caliper Overhaul Kit, Rear. Maintenance of this system becomes vital for vehicles with high mileages since new wheel cylinders demonstrate better performance than rebuilt ones. A pair of wheel cylinders should get replaced at once to achieve balanced brake performance whenever fluid leaks or stuck brakes occur. A reliable installation requires hoisting the vehicle with safety precautions while removing brake shoe parts before using a flare-nut wrench to disconnect the brake line. The brake backing plate must release the wheel cylinder for installation and users must secure the brake line opening to stop fluid leaks and contaminations. Installation of the new Toyota part 04479-28090 Caliper Overhaul Kit, Rear demands exact positioning then the required torque settings for bolt tightness while also verifying that the brake line fitting remains secure. The brake components must be fully reinstalled followed by brake bleeding then an operation check before any driving takes place. Every purchase from our site receives both manufacturer warranty and convenient return policy coverage while offering the full range of OEM Toyota components that includes the Toyota part 04479-28090.