OEM Toyota part with Part Number 04478-0E030 Cylinder Kit, Disc Brake, Front known as Toyota Wheel Cylinder component provides maximum durability and optimal performance. The certified Toyota dealership components feature a warranty protection for 12-month, 12,000-mile usage. The use of OEM part 04478-0E030 Cylinder Kit, Disc Brake, Front enables maintenance standards that match the original factory installation quality. The specific item serves the following model series: 2010-2016 Toyota Highlander and 2011-2016 Toyota Sienna.
Genuine Toyota offers this high-quality Cylinder Kit, Front Disc Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit under manufacturer part number 04478-0E030 for use in the Front. This product identification code consists of 04479 which proves its manufacturer as Toyota. This component features dimensions of 4.0 x 2.0 x 1.5 inches and weighs 0.50 Pounds. This component 044780E030 is specially constructed for vehicle fitting requirements within the Direct Replacement classification. Each vehicle requires the component which has an identified SKU of 04478-0E030. The factory-warranty from Toyota guarantees continuous reliable operation and high performance for this part 04478-0E030. The Shipping Policy and Return Policy pages provide full details about shipping procedures and return instructions.
A braking system functions with peak performance and safety through the Toyota Part Number 04478-0E030 which carries the Cylinder Kit, Disc Brake, Front. Maintenance of this system becomes vital for vehicles with high mileages since new wheel cylinders demonstrate better performance than rebuilt ones. A pair of wheel cylinders should get replaced at once to achieve balanced brake performance whenever fluid leaks or stuck brakes occur. A reliable installation requires hoisting the vehicle with safety precautions while removing brake shoe parts before using a flare-nut wrench to disconnect the brake line. The brake backing plate must release the wheel cylinder for installation and users must secure the brake line opening to stop fluid leaks and contaminations. Installation of the new Toyota part 04478-0E030 Cylinder Kit, Disc Brake, Front demands exact positioning then the required torque settings for bolt tightness while also verifying that the brake line fitting remains secure. The brake components must be fully reinstalled followed by brake bleeding then an operation check before any driving takes place. Every purchase from our site receives both manufacturer warranty and convenient return policy coverage while offering the full range of OEM Toyota components that includes the Toyota part 04478-0E030.