OEM Toyota part with Part Number 47570-20040 Wheel Cylinder, Driver Side known as Toyota Wheel Cylinder component provides maximum durability and optimal performance. The certified Toyota dealership components feature a warranty protection for 12-month, 12,000-mile usage. The use of OEM part 47570-20040 Wheel Cylinder, Driver Side enables maintenance standards that match the original factory installation quality. The specific item serves the following model series: 1984-1986 Toyota Camry and 1984-1992 Toyota Corolla and 1986-1989 Toyota Celica.
Genuine Toyota offers this high-quality Cylinder Assembly, Wheel; Drum Brake Wheel Cylinder; Wheel Cylinder Repair Kit under manufacturer part number 47570-20040 for use in the Driver Side. This product identification code consists of 47570 which proves its manufacturer as Toyota. This component features dimensions of 4.0 x 3.1 x 1.9 inches and weighs 0.90 Pounds. This component 4757020040 is specially constructed for vehicle fitting requirements within the Direct Replacement classification. This product is also known as Cylinder Assembly, Rear Wheel Brake(For Driver Side, Front Or Upper) but could replace 47570-39115, 47570-32010. Each vehicle requires the component which has an identified SKU of 47570-20040. The factory-warranty from Toyota guarantees continuous reliable operation and high performance for this part 47570-20040. The Shipping Policy and Return Policy pages provide full details about shipping procedures and return instructions.
The Toyota part 47570-20040 Wheel Cylinder, Driver Side is an inseparable part of the braking system providing the optimal performance and safety. In order to ensure its functionality, frequent inspection and on time maintenance are necessary. In replacement of the wheel cylinder, it is necessary to start by firmly lifting the vehicle and removing the brake shoe set, making sure that all debris is cleared in the area. Unscrew the line of brakes using a flare-nut wrench, being careful not to break it. Once the wheel cylinder has been removed off the brake backing plate plug the brake line so that no fluid can be lost. At installation, take care in locating the Toyota part 47570-20040, to be sure to connect the brake line without cross threading the O-ring. The wheel cylinder and the fitting of the brake line should be properly torqued. When assembling it, it is vital to bleed the brakes and check their functionality before driving. To the quality conscious, our site will be a one-stop shop to experience the high quality of Toyota parts, including the 47570-20040, which will come with a warranty supplied by the manufacturer and a no-hassle return policy.