Toyota 52159-48900
Bumper Cover, Rear Driver Side

The process to replace a rear bumper cover starts by removing the spare wheel cover tray together with luggage compartment tray along with rear floor finish plate through four clip extraction using a screwdriver with tape on the tip. Begin by taking out the four screws from the quarter panel mudguard sub-assembly rear RH before moving onto the quarter panel mudguard sub-assembly rear LH. Complete the rear bumper cover removal by taking out 2 clips and 2 screws as well as other clips followed by removing 4 screws and 4 nuts. You should use a screwdriver to reach under the rear bumper cover and push against the rear bumper cover retainer while you elevate the cover so you can pull away the claws from their position. Using a screwdriver press down the claws of the rear bumper cover retainer while keeping up the rear bumper cover to pull it completely to your side and separate the claws for removal.

Remove the radiator grille by taking out the 4 clips.