Toyota 52119-48900
Bumper Cover, Front Driver Side

Start by removing the radiator grille through the process of disconnecting its 4 clips. The front fender liner on the right-hand side requires removal by unscrewing 2 screws followed by 4 clips for access to one extra screw and a fragment of the liner to extract the bumper cover. The identical steps should be performed on the left-hand side fender liner. Start by unscrewing six screws together with two bolts before disconnecting the fog lamp connector on models that feature this equipment. Continue by uninstalling the fog lamp unit from the right-hand side followed by the left-hand side. If fog lights are absent from both right and left sides of the front bumper then users should remove the hole covers.

Remove the spare wheel cover tray, luggage compartment tray, and rear floor finish plate by taking out the 4 clips and using a screwdriver to detach the plate, ensuring to tape the screwdriver tip beforehand.