Toyota 86101-52600
Antenna Cable

Place the antenna cord positioning tapes into the 4 claws of the front and rear side rail spacers, align them with the markings on the roof headlining, and secure the antenna cord with 8 new pieces of tape, ensuring the tape is applied securely without touching the adhesive surface.

First, disconnect the cable from the negative battery terminal and wait at least 90 seconds to prevent the airbag from deploying.

The assist grip sub-assembly and cover, seat belt anchor cover, center pillar upper and lower garnishes RH and LH, front seat outer belt assemblies RH and LH, seat belt anchor cover cap, roof side inner garnishes RH and LH, rear center seat outer belt assembly, deck trim side panel assemblies RH and LH, rear seat outer belt assemblies RH and LH, rear door opening trim weatherstrips RH and LH, rear door scuff plates RH and LH, front door opening trim weatherstrips RH and LH, cowl side trim boards RH and LH, instrument panel under cover sub-assemblies RH and LH, front door scuff plates RH and LH, rear deck trim cover, rear seat assemblies for 60/40 split seat type RH and LH, No. 1 rear seat leg covers for RH and LH sides, No. 2 rear seat leg cover, rear seatback assembly for fold-down seat type, rear seat cushion cover pad sub-assembly for fold-down seat type, deck floor boxes RH and LH, deck board sub-assembly, and package tray trim panel assembly.

Remove the rear seat cushion cover pad sub-assembly, followed by the rear seatback assemblies (RH and LH), and then the luggage compartment floor mat, spare wheel cover assembly, and luggage compartment trim inner pad.

Disconnect the negative battery terminal and wait at least 90 seconds to prevent airbag activation.