My Garage
Cart
Make sure this part fits

Toyota 47201-02340
Master Cylinder

2005-2008 Toyota 4720102340

Customer Questions & Expert Answers (10)
Toyota 47201-02340 Master Cylinder
  • Part Description
    Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir
  • Part Name Code
    47201
  • Manufacturer
    Toyota
Make sure this part fits
$293.29 MSRP: $418.75
You Save: $125.46 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code47201
    Manufacturer Part Number47201-02340
    Part DescriptionCylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir
    Other NamesCylinder Sub-Assembly, Brake Master
    Manufacturer NoteW(VSC)
    Item Dimensions9.3 x 7.3 x 5.7 inches
    Item Weight4.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU47201-02340
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2008 Toyota CorollaCE, LE, S, XRS4 Cyl 1.8 L GAS
    2005-2008 Toyota MatrixBase, XR, XRS4 Cyl 1.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will 47201-02340 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 47201-02340 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What should be done for configurations without VSC after pushing in the piston for the 2008 Toyota Corolla? Posted by Customer
    A:
    Install a new gasket and a new piston stopper bolt, torqued to 10 Nm (102 kgf-cm, 7 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the first step to disassemble the brake master cylinder for the 2008 Toyota Corolla? Posted by Customer
    A:
    Remove the brake master cylinder reservoir sub-assembly by taking out the stopper screw and the reservoir sub-assembly, followed by the cap and strainer from the reservoir sub-assembly, and then the 2 grommets from the master cylinder sub-assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What should be done after disconnecting the brake tubes for the 2007 Toyota Corolla? Posted by Customer
    A:
    Remove the 2 nuts, pull out the master cylinder sub-assembly and No. 1 way, and check the valve bracket.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    How do you inspect the brake master cylinder for the 2006 Toyota Corolla? Posted by Customer
    A:
    Inspect the inside of the brake master cylinder for scratches and replace if necessary.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the first step to remove and replace the brake master cylinder for the 2007 Toyota Matrix? Posted by Customer
    A:
    First, drain the brake fluid, ensuring to wash off any fluid that contacts painted surfaces.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the final step in removing the No. 2 piston for the 2008 Toyota Matrix? Posted by Customer
    A:
    Tap the flanged part against wooden blocks until the end of the No. 2 piston emerges, and then pull the No. 2 piston straight out from the master cylinder body, again avoiding any scratches to the interior.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the first step to overhaul the brake master cylinder for the 2006 Toyota Matrix? Posted by Customer
    A:
    First, drain the brake fluid and wash off any spills on painted surfaces immediately.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What should be done for configurations without VSC for the 2008 Toyota Matrix? Posted by Customer
    A:
    Push in the piston and install a new gasket and a new piston stopper bolt, torqued to 10 Nm (102 kgf-cm, 7 ft-lbf).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is different for the 2005 Toyota Matrix with VSC when removing the piston? Posted by Customer
    A:
    For models with VSC, push in the piston and remove the straight pin by turning over the cylinder body, using a shop rag to prevent damage.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 47201-02340, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 47201-02340 Master Cylinder. It is sometimes referred to as Toyota Brake Master Cylinder, Toyota Master Cylinder Repair Kit. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4720102340 Master Cylinder. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery