Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 47201-02310
Master Cylinder

2003-2008 Toyota 4720102310

Customer Questions & Expert Answers (13)
Toyota 47201-02310 Master Cylinder
  • Part Description
    Cylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir
  • Part Name Code
    47201
  • Manufacturer
    Toyota
Make sure this part fits
$227.75 MSRP: $325.18
You Save: $97.43 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 47201-02310 Master Cylinder is Ref No. 1 in the diagram below

    2004 Toyota Corolla Master Cylinder Diagram for 47201-02310
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 47201-02310

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code47201
    Manufacturer Part Number47201-02310
    Part DescriptionCylinder Sub-Assembly, Brake Stroke Simulator; Brake Master Cylinder; Brake Reservoir
    Other NamesCylinder Sub-Assembly, Brake Master
    Item Dimensions9.3 x 7.4 x 5.9 inches
    Item Weight4.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU47201-02310
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2008 Toyota CorollaCE, LE, S, XRS4 Cyl 1.8 L GAS
    2003-2008 Toyota MatrixBase, XR, XRS4 Cyl 1.8 L GAS

  • Customer Questions & Expert Answers

    Q:
    Will 47201-02310 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 47201-02310 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What should be done if there is VSC for the 2008 Toyota Corolla? Posted by Customer
    A:
    Push in the piston and remove the straight pin by turning over the cylinder body, using a shop rag to prevent damage.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the procedure for manual transmission regarding the clutch reservoir tube for the 2007 Toyota Corolla? Posted by Customer
    A:
    Slide the clip to disconnect the clutch reservoir tube No. 1 from the reservoir sub-assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What should be done after reinstalling the air cleaner cap sub-assembly for the 2003 Toyota Corolla? Posted by Customer
    A:
    Fill the reservoir with brake fluid, bleed the master cylinder, bleed the brake line, check the fluid level in the reservoir, and inspect for any brake fluid leakage.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What steps are involved in removing the brake master cylinder reservoir sub-assembly for the 2006 Toyota Corolla? Posted by Customer
    A:
    Take out the stopper screw, cap, strainer, and the 2 grommets from the master cylinder sub-assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    How should the No. 1 and No. 2 pistons be installed into the master cylinder body for the 2008 Toyota Corolla? Posted by Customer
    A:
    Ensure the pistons are installed straight to avoid damage to the cylinder's interior and the lip of the cylinder cup.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the process for removing the master cylinder reservoir sub-assembly for the 2004 Toyota Matrix? Posted by Customer
    A:
    Remove the reservoir stopper screw and the master cylinder reservoir sub-assembly, followed by the two cylinder reservoir grommets.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What are the final steps after installing the air cleaner cap sub-assembly for the 2007 Toyota Matrix? Posted by Customer
    A:
    Fill the reservoir with brake fluid, bleed the master cylinder using Special Service Tool: 09023-00101, bleed the brake line, check the brake fluid level in the reservoir, and inspect for any brake fluid leaks.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the procedure for inspecting and adjusting the brake booster push rod for the 2005 Toyota Matrix? Posted by Customer
    A:
    Set Special Service Tool: 09737-00013 on the master cylinder, lower the rod until it slightly touches the piston, apply chalk to measure the clearance, and adjust the length if necessary using Special Service Tool: 09737-00020 and a 7 mm socket driver.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the orientation for installing the No. 2 piston in configurations with VSC for the 2008 Toyota Matrix? Posted by Customer
    A:
    Install the No. 2 piston with the pin hole facing upward.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the final step in the installation process for the 2006 Toyota Matrix? Posted by Customer
    A:
    Install the master cylinder sub-assembly and No.1 way, securing with two nuts at a torque of 12.5 Nm (127 kgf-cm, 9 ft. lbs.), connect the brake tubes, reconnect the clutch reservoir tube No.1, and attach the brake fluid level switch connector.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What precautions should be taken when extracting the piston sub-assemblies for the 2003 Toyota Matrix? Posted by Customer
    A:
    Carefully extract the No.1 piston sub-assembly straight out to avoid damaging the cylinder bore, and use a cloth and two wooden blocks to gently push out the No.2 piston sub-assembly, ensuring the distance from the cloth to the top of the blocks is at least 100 mm (3.94 inches).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the procedure if not equipped with VSC for the 2008 Toyota Matrix? Posted by Customer
    A:
    Push in the piston to remove the piston stopper bolt and gasket.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Brake Master Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 47201-02310, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 47201-02310 Master Cylinder. It is sometimes referred to as Toyota Brake Master Cylinder, Toyota Master Cylinder Repair Kit. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4720102310 Master Cylinder. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery