How to install the fan and generator Drive Belt on Toyota Yaris?

Before installing the V belt for fan and generator on a 1NZ-FE engine start by fitting it briefly to each pulley to check its proper position within the rib groove. The generator V belt tension must be adjusted through the insertion of an adjusting bar between the engine mounting bracket and generator assembly which should be pushed in the direction of vehicle front. Inserting the bar between the camshaft timing oil control valve assembly and generator assembly will cause damage so avoid this practice. First tighten bolt A to 19 Nm torque strength before adjusting bolt B to 54 Nm torque strength. Examine the V belt to check both deflection and tension while making necessary adjustments during inspection. During new belt installation you must check the specified deflection point and apply the required tension value. After five minutes of belt usage we must use belt specifications but initial installation requires adjusting to the average values from each specification. The V-ribbed belt tension and deflection requirement must be checked twice during first engine crank revolutions but testing the belt tension gauge with a master gauge should be done before making measurements. The final step involves mounting the engine towards the right side beneath the covering.

How to remove the drive belt on Toyota Yaris?

The first step to remove the drive belt from the 1NZ-FE engine requires engine under cover RH removal. Open bolts A and B first to remove the tension from the fan and generator V belt and then take off both components.

OEM Toyota Yaris Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Drive Belts found

View related parts
Toyota Yaris Serpentine Belt
Part Number: 90916-02705
$21.74 MSRP: $30.25
You Save: $8.51 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Alternator Belt; Belt, V(For Fan & Alternator)
- Manufacturer Note: AIR CONDITIONER COMPRESSOR-WITHOUT
- Replaces: 90916-02556, 90916-02543
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2018 Toyota Yaris | L, LE, SE | 4 Cyl 1.5 L GAS
View related parts
Toyota Yaris Serpentine Belt
Part Number: 90916-02704
$18.51 MSRP: $25.77
You Save: $7.26 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Alternator Belt; Belt, V(For Fan & Alternator)
- Replaces: 90916-02498, 99364-90920, 99364-30920, 90916-02499
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2016, 2007-2012 Toyota Yaris | Base, L, LE, S, SE | 4 Cyl 1.5 L GAS
View related parts
Toyota Yaris Serpentine Belt
Part Number: 90916-02500
$17.20 MSRP: $23.93
You Save: $6.73 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, V-Ribbed; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Alternator Belt; Belt, V(For Fan & Alternator)
- Replaces: 99364-91180, 90916-02501, 99364-31180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2012 Toyota Yaris | Base, S | 4 Cyl 1.5 L GAS
View related parts
Toyota Yaris Water Pump Belt
Part Number: 90118-WB464
$20.26 MSRP: $28.19
You Save: $7.93 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Belt'V', Water Pump; Accessory Drive Belt; Serpentine Belt Drive Kit; Serpentine Belt; V-Belt; Belt, V(For Water Pump & Crankshaft Pulley); Drive Belt
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2020 Toyota Yaris | L, LE, XLE | 4 Cyl 1.5 L GAS
View related parts
Toyota Yaris Serpentine Belt
Part Number: 90118-WBA55
$30.46 MSRP: $42.39
You Save: $11.93 (29%)
ADD TO CART
Product Specifications
- Other Name: Belt'V', Alternator.& A; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Alternator Belt; Belt, V(For Fan & Alternator)
- Replaces: 90118-WB455
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2020 Toyota Yaris | L, LE, XLE | 4 Cyl 1.5 L GAS

Toyota Yaris Drive Belt

Choose genuine Drive Belt that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Drive Belt for your Toyota Yaris? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Yaris parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Drive Belt in Toyota Yaris series of automobiles is instrumental in other parts like the alternator and the A/C compressor to be powered by the engine. Usually, these parts are linked by a serpentine belt that drives the belt and transitions them to the crankshaft pulley. The Driving Belts into Yaris car's are usually expected to works for approximately 100,000miles before they are require to be replaced to avoid further harm to both the parts and the engine. Belts are elastic bands applied in mechanical applications so that they can connect shafts and transmit movement proficiently; there are several groups including V-belts' type and timing belts, which have enhanced grip, endurance, and no-slip features. These advancements have therefore adopted the Drive Belt as a significant component with automobile production.

Toyota Yaris Drive Belt Parts and Q&A

Serpentine Belt
90916-02500
Q: How to install the fan and generator Drive Belt on Toyota Yaris?
A:
Before installing the V belt for fan and generator on a 1NZ-FE engine start by fitting it briefly to each pulley to check its proper position within the rib groove. The generator V belt tension must be adjusted through the insertion of an adjusting bar between the engine mounting bracket and generator assembly which should be pushed in the direction of vehicle front. Inserting the bar between the camshaft timing oil control valve assembly and generator assembly will cause damage so avoid this practice. First tighten bolt A to 19 Nm torque strength before adjusting bolt B to 54 Nm torque strength. Examine the V belt to check both deflection and tension while making necessary adjustments during inspection. During new belt installation you must check the specified deflection point and apply the required tension value. After five minutes of belt usage we must use belt specifications but initial installation requires adjusting to the average values from each specification. The V-ribbed belt tension and deflection requirement must be checked twice during first engine crank revolutions but testing the belt tension gauge with a master gauge should be done before making measurements. The final step involves mounting the engine towards the right side beneath the covering.
Serpentine Belt
90916-02704
Q: How to remove the drive belt on Toyota Yaris?
A:
The first step to remove the drive belt from the 1NZ-FE engine requires engine under cover RH removal. Open bolts A and B first to remove the tension from the fan and generator V belt and then take off both components.