How to service and repair the Radiator Fan on Toyota Tundra?

The Radiator Fan service process must start with removal of the No.1 engine under cover and the drain of engine coolant before V-bank cover removal. Begin by taking out the radiator hose inlet and outlet then proceed with removing the fan shroud and fan by untightening the 4 securing nuts near the fluid coupling. The repair requires checking the fluid coupling assembly for damage alongside looking for silicon oil leaks and conducting replacement if any component shows signs of damage. When installing the fan into the coupling position the fan using 4 nuts to which you should apply 9.0 N m of torque (92 kgf cm or 80 in. lbf torque). Reinstall the fan shroud after installing radiator hoses inlet and outlet while adding engine coolant to check for coolant leakages. Conclude by reinstalling both the V-bank cover together with the No. 1 engine under cover.

How to install the Radiator Fan on Toyota Tundra?

You should start fan installation of the 1GR-FE engine radiator by screwing it to the coupling with 4 nuts set to 9.0 Nm (92 kgf-cm, 80 in-lbf). Mount the fan shroud after putting in the radiator hose inlet and outlet. Check for leaks during inspection after introducing engine coolant. Bolt down the V-bank cover before you complete the installation by putting on the No. 1 engine under cover.

OEM Toyota Tundra Radiator fan

Radiator Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Radiator fans found

View related parts
Toyota Tundra Fan Blade, Front Part Number: 16361-38020
$122.66 MSRP: $173.64
You Save: $50.98 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan; Engine Cooling Fan Clutch Blade, Front; Radiator Fan Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2021 Toyota Tundra | 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Fan Part Number: 16361-50110
$131.82 MSRP: $186.61
You Save: $54.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator Fan Assembly; Fan Blade
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2009 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Fan Blade Part Number: 16361-62010
$152.62 MSRP: $216.05
You Save: $63.43 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan; Engine Cooling Fan Clutch Blade; Engine Cooling Fan Blade; Engine Cooler Fan Blad; Radiator Fan Assembly; Blade
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Tundra | Base, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Fan Blade Part Number: 16361-50050
$165.08 MSRP: $233.68
You Save: $68.60 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan; Engine Cooling Fan Clutch Blade; Radiator Fan Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Fan Blade, Front Part Number: 16361-0P381
$122.66 MSRP: $173.64
You Save: $50.98 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan; Engine Cooling Fan Clutch Blade, Front; Engine Cooling Fan Blade; Engine Cooler Fan Blad; Radiator Fan Assembly
- Position: Front
- Replaces: 16361-0P380
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2014 Toyota Tundra | Base, SR, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota Tundra Fan Blade Part Number: 16361-F4010
$148.51 MSRP: $210.23
You Save: $61.72 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan; Engine Cooling Fan Clutch Blade
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2025 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Fan Part Number: 16361-50080
$165.55 MSRP: $234.35
You Save: $68.80 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radiator Fan Assembly; Fan Blade
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Fan Blade, Passenger Side Part Number: 16361-70100
$120.54 MSRP: $170.64
You Save: $50.10 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2025 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS

Toyota Tundra Radiator fan

Choose genuine Radiator fan that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Radiator fan for your Toyota Tundra? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota Tundra Radiator Fan enables maintaining the temperature of the engine by drawing air in the radiator to ensure that the heat via the coolant exits. The Radiator Fan is located near the radiator and consists of a motorized fan blade within a mounting shroud that forces outside air to pass over the radiator fins and over the coolant flowing through it. The Radiator Fan assists the circulation of air by the radiator to keep the Toyota radiator functional even when there is no adequate airflow due to movement. This airflow enables the liquid to dissipate unnecessary heat before it gets back to the engine to reduce the chances of overheating, which can lead to engine destruction. During normal operation, the Radiator Fan functions with the rest of the cooling system and helps to maintain the performance of the Tundra whether the vehicle is moving slowly, idling, or towing. The assembly design consists of the fan blade, the shroud that guides air, and the motor that rotates the blade, making it a small unit to be fitted in a Toyota Tundra. The styles are not mentioned, and hence, the Radiator Fan is promoted as the only necessary cooling element for all Toyota Tundras.

Toyota Tundra Radiator fan Parts and Q&A

Fan
16361-50110
Q: How to service and repair the Radiator Fan on Toyota Tundra?
A:
The Radiator Fan service process must start with removal of the No.1 engine under cover and the drain of engine coolant before V-bank cover removal. Begin by taking out the radiator hose inlet and outlet then proceed with removing the fan shroud and fan by untightening the 4 securing nuts near the fluid coupling. The repair requires checking the fluid coupling assembly for damage alongside looking for silicon oil leaks and conducting replacement if any component shows signs of damage. When installing the fan into the coupling position the fan using 4 nuts to which you should apply 9.0 N m of torque (92 kgf cm or 80 in. lbf torque). Reinstall the fan shroud after installing radiator hoses inlet and outlet while adding engine coolant to check for coolant leakages. Conclude by reinstalling both the V-bank cover together with the No. 1 engine under cover.
Fan Blade, Front
16361-38020
Q: How to install the Radiator Fan on Toyota Tundra?
A:
You should start fan installation of the 1GR-FE engine radiator by screwing it to the coupling with 4 nuts set to 9.0 Nm (92 kgf-cm, 80 in-lbf). Mount the fan shroud after putting in the radiator hose inlet and outlet. Check for leaks during inspection after introducing engine coolant. Bolt down the V-bank cover before you complete the installation by putting on the No. 1 engine under cover.