How to service the A/C Compressor and its magnetic clutch on Toyota Tundra?

As part of compressor and magnetic clutch service for the 1GR-FE engine begin with the removal of refrigerant from the refrigeration system then elimination of the fender apron mudguard seal LH by unclipping 6 seals and the seal. The fan and generator V belt removal procedure should start with disconnecting the discharge hose through bolt removal and cooler compressor discharge refrigerant hose removal before extracting the hose O-ring. You should use vinyl tape to cover the disconnected sections of the system thus blocking out possible moisture and external materials. You should perform this sequence again for suction hose operations by extracting the bolt and cooler refrigerant suction hose from the cooler compressor then taking out the O-ring. The vinyl tape must be used to seal all openings once more. Start the cooler compressor assembly removal process by disconnecting the connector then removing its two bolts and two nuts followed by the removal of two stud bolts and finally the complete cooler compressor. To install the compressor you must adjust its oil levels by releasing gases from the service valve and draining proper amounts from both new parts then use ND-OIL 8 or comparable oil products for this work. The cooler compressor assembly installation requires initial 2 stud bolts tightening at 10 N.m (102 kgf.cm, 7 ft.lbf) before proceeding to 2 bolts and 2 nuts at 24.5 N.m (250 kgf.cm, 18 ft.lbf). The bolt installation sequence must be followed during this process. Install the suction hose after removing vinyl tape by applying oil to the O-ring and fitting surface and inserting the O-ring before using a bolt tightened to 9.8 N.m (100 kgf.cm, 87 in.lbf). When affixing the discharge hose connect the bolt with the same torque value but first apply compressor oil to a new O-ring. To finish the installation install the fan V belt afterward and then attach the fender apron mudguard seal LH with the help of 6 clips. The refrigerant needs to be charged after engine warm-up and we should conduct a leak test for refrigerant gas.

OEM Toyota Tundra A/C Compressor

Air Conditioning Compressor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 A/C Compressors found

View related parts
Toyota Tundra Compressor Assembly
Part Number: 88320-0C130
$430.61 MSRP: $569.94
You Save: $139.33 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Compressor; New A/C Compressor; Compressor; Compressor Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2009 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Compressor Assembly
Part Number: 88320-0C110
$281.22 MSRP: $401.52
You Save: $120.30 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: A/C Compressor; New A/C Compressor; Compressor; Compressor Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2009 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Tundra Compressor Assembly
Part Number: 88320-0C160
$385.09 MSRP: $564.36
You Save: $179.27 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Compressor; New A/C Compressor; Compressor; Compressor Assembly, Cooler
- Manufacturer Note: AIR CONDITIONER-WITHOUT
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2017 Toyota Tundra | 1794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Compressor
Part Number: 88320-34030-84
$299.31 MSRP: $428.21
You Save: $128.90 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Reman, Compressor Assembly; A/C Compressor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Tundra | Base, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Compressor Assembly
Part Number: 88320-0C190
$297.18 MSRP: $378.52
You Save: $81.34 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Compressor; Compressor; Compressor Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2021 Toyota Tundra | 1794 Edition, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Tundra Compressor Assembly
Part Number: 88320-0C210
$393.27 MSRP: $576.33
You Save: $183.06 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Compressor; Compressor; Compressor Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2024 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Compressor Assembly
Part Number: 88370-34010
$1055.79 MSRP: $1515.35
You Save: $459.56 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Compressor Assembly, With Pulley; Compressor; Compressor Assembly, W/Motor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022-2024 Toyota Tundra | 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.4 L GAS
View related parts
Toyota Tundra Compressor Assembly
Part Number: 88320-0C120
$414.72 MSRP: $607.78
You Save: $193.06 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Compressor; New A/C Compressor; Compressor; Compressor Assembly, Cooler
- Manufacturer Note: AIR CONDITIONER-WITHOUT
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2014 Toyota Tundra | Base, SR, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota Tundra Compressor Assembly
Part Number: 88320-0C090-84
Product Specifications
- Other Name: Tundra Reman Compres; A/C Compressor; Compressor
- Replaces: 88320-0C090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Tundra | Base, SR5 | 6 Cyl 4.0 L GAS
View related parts
Toyota Tundra Compressor
Part Number: 88320-0C010-84
Product Specifications
- Other Name: Compressor, Reman; A/C Compressor
- Replaces: 88320-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2006 Toyota Tundra | Base, Limited, SR5 | 8 Cyl 4.7 L GAS

Toyota Tundra A/C Compressor

Choose genuine A/C Compressor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM A/C Compressor for your Toyota Tundra? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tundra parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The A/C Compressor in Toyota Tundra vehicles is responsible for the control of temperature inside the vehicle through the operation of the refrigerant circuit of the air conditioning system. This component ensures that there is proper condition of the air conditioning system to give comfort to the passengers no matter the nature of the road. Several types of A/C Compressors have been implemented in the Tundra over the years as the technology advanced, and the design was refined. These differences include size, efficiency, and likely working methods, which may impact the entire performance and dependability of the structures. Knowledge of these differences is critical when it comes to maintenance and repair, to promote the prime functionality of the A/C system in the Tundra.

Toyota Tundra A/C Compressor Parts and Q&A

Compressor Assembly
88320-0C110
Q: How to service the A/C Compressor and its magnetic clutch on Toyota Tundra?
A:
As part of compressor and magnetic clutch service for the 1GR-FE engine begin with the removal of refrigerant from the refrigeration system then elimination of the fender apron mudguard seal LH by unclipping 6 seals and the seal. The fan and generator V belt removal procedure should start with disconnecting the discharge hose through bolt removal and cooler compressor discharge refrigerant hose removal before extracting the hose O-ring. You should use vinyl tape to cover the disconnected sections of the system thus blocking out possible moisture and external materials. You should perform this sequence again for suction hose operations by extracting the bolt and cooler refrigerant suction hose from the cooler compressor then taking out the O-ring. The vinyl tape must be used to seal all openings once more. Start the cooler compressor assembly removal process by disconnecting the connector then removing its two bolts and two nuts followed by the removal of two stud bolts and finally the complete cooler compressor. To install the compressor you must adjust its oil levels by releasing gases from the service valve and draining proper amounts from both new parts then use ND-OIL 8 or comparable oil products for this work. The cooler compressor assembly installation requires initial 2 stud bolts tightening at 10 N.m (102 kgf.cm, 7 ft.lbf) before proceeding to 2 bolts and 2 nuts at 24.5 N.m (250 kgf.cm, 18 ft.lbf). The bolt installation sequence must be followed during this process. Install the suction hose after removing vinyl tape by applying oil to the O-ring and fitting surface and inserting the O-ring before using a bolt tightened to 9.8 N.m (100 kgf.cm, 87 in.lbf). When affixing the discharge hose connect the bolt with the same torque value but first apply compressor oil to a new O-ring. To finish the installation install the fan V belt afterward and then attach the fender apron mudguard seal LH with the help of 6 clips. The refrigerant needs to be charged after engine warm-up and we should conduct a leak test for refrigerant gas.

Related Toyota Tundra Parts

Browse Toyota Tundra A/C Compressor by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000