How to service the sunroof or moonroof on Toyota Tacoma?

Service of the sunroof or moonroof starts with unclipping the sunshade trim before removing the lock handle and base components along with their associated 2 screws, lock garnish and 2 bolts or nuts. The lock handle and holders of extra cab models should be detached using 2 bolts but double cab models require 2 nuts during removal. Familiarize with the procedure of removing the lock base and spacer with 2 screws which need to be torqued to 6.0 N.m (60 kgf.cm, 52 in.lbf). To remove the wind deflector panel detach the clip first through small tooling operations and then use a screwdriver to separate the panel followed by operations on the opposite side. Detach the screw and auxiliary catch that hold the removable roof before you can remove the roof headlining. Detach the hinge case along with two bolts from both sides of the vehicle and tighten them to 3.5 N.m (35 kgf.cm, 30 in.lbf). Installation occurs in the exact opposite sequence compared to removal procedures.

OEM Toyota Tacoma Sunroof

Moonroof

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sunroofs found

View related parts
Toyota Tacoma Sunroof Glass
Part Number: 63201-04010
$506.43 MSRP: $742.18
You Save: $235.75 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Glass Sub-Assembly, Slide Door; Glass Sub-Assembly, Sliding Roof
- Manufacturer Note: MOON ROOF-WITH
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2023 Toyota Tacoma | Limited, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Tacoma Sunroof Glass
Part Number: 63201-35031
Product Specifications
- Other Name: Glass Sub-Assembly, Removable Roof
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2003 Toyota Tacoma | Base, DLX, Limited, Pre Runner, SR5, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Sunroof Glass
Part Number: 63201-35030
Product Specifications
- Other Name: Glass Sub-Assembly, Removable Roof
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1997 Toyota Tacoma | Base, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Sunroof Glass
Part Number: 63201-35070
Product Specifications
- Other Name: Glass Sub-Assembly, Removable Roof
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Tacoma | Base, Pre Runner | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

Toyota Tacoma Sunroof

If you're thinking about purchasing OEM parts for your Toyota Tacoma, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tacoma Sunroof at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Tacoma Sunroof Parts Questions & Experts Answers

Sunroof Glass
63201-35070
Q: How to service the sunroof or moonroof on Toyota Tacoma?
A: Service of the sunroof or moonroof starts with unclipping the sunshade trim before removing the lock handle and base components along with their associated 2 screws, lock garnish and 2 bolts or nuts. The lock handle and holders of extra cab models should be detached using 2 bolts but double cab models require 2 nuts during removal. Familiarize with the procedure of removing the lock base and spacer with 2 screws which need to be torqued to 6.0 N.m (60 kgf.cm, 52 in.lbf). To remove the wind deflector panel detach the clip first through small tooling operations and then use a screwdriver to separate the panel followed by operations on the opposite side. Detach the screw and auxiliary catch that hold the removable roof before you can remove the roof headlining. Detach the hinge case along with two bolts from both sides of the vehicle and tighten them to 3.5 N.m (35 kgf.cm, 30 in.lbf). Installation occurs in the exact opposite sequence compared to removal procedures.