Toyota 63201-35031
Sunroof Glass

Begin servicing or repairing the sliding roof by removing the sunshade trim followed by 2 screws to unfasten the lock handle and lock base with the addition of removing the lock garnish and proceeding to detach the lock handle and holders with two bolts then finish by removing the lock base and spacer using two screws. Start by untucking the wind deflector panel clip before inserting a screwdriver to separate it from its position on each side of the roof. The removable roof auxiliary catch needs to be unscrewed first before you can remove the inner Weather Strip and sliding roof opening trim and assist grip and sun visors together with holders in addition to the inner rear view mirror. Unclip the quarter trim from one side and repeat on the other side being sensitive to avoid breaking the quarter trim or front pillar garnish. The next steps involve taking off the front pillar garnish together with the front section of the roof headlining. Finish installation of the removable roof hinge case by unwiring 2 bolts (Torque: 3.4 N.m (35 kgf.cm, 30 in.lbf)) on each side. The installation steps follow the reverse sequence of uninstallation.

Installation follows the reverse order of these removal steps.