How to remove and replace the Power Steering Pump on Toyota Tacoma?

The first step to remove and install the 2TR-FE power steering vane pump is to disconnect the negative battery cable. You must begin by taking away the engine under cover sub-assembly No. 1 from 4WD and Pre-Runner designs. First disconnect the fan along with the generator V belt. The power steering fluid needs draining before disconnecting the pressure feed tube assembly through step-by-step removal of the clip followed by return hose separation and union bolt extraction and final pressure tube detachment with gasket removal from that part. Finish the procedure with connector removal from the oil pressure switch then removal of the vane pump assembly bolts.

How to install a Power Steering Pump and complete the associated tasks on Toyota Tacoma?

The vane pump assembly installation requires 2 bolts to be torqued at 21 Nm (214 kgf-cm, 15 ft-lbf) while the oil pressure switch connector must be connected without any oil on its surface. After securing the new gasket on the pressure feed tube you should attach it to the union bolt by torquing it to 51 Nm (520 kgf-cm, 38 ft-lbf) while connecting the return hose through the clip. The fan needs installing with a generator V belt followed by connecting the cable to the negative terminal at a torque of 3.9 Nm (40 kgf-cm, 35 in-lbf). Add power steering fluid before bleeding the power steering system. The final step includes attaching engine under cover sub-assembly No. 1 (for 4WD and Pre-Runner) and tightening it to 30 Nm (306 kgf-cm, 22 ft-lbf).

OEM Toyota Tacoma Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Power Steering Pumps found

View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44320-04052
$338.89 MSRP: $483.85
You Save: $144.96 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Replaces: 44320-04051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2004 Toyota Tacoma | Base, DLX, Limited, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44320-04020
$346.34 MSRP: $494.50
You Save: $148.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2001 Toyota Tacoma | Base, DLX, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44310-04200
$297.41 MSRP: $424.64
You Save: $127.23 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2023 Toyota Tacoma | Limited, Nightshade, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport | 6 Cyl 3.5 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44310-04150
$309.06 MSRP: $441.27
You Save: $132.21 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2015 Toyota Tacoma | Base, Pre Runner, TRD Pro | 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44310-04140
$319.31 MSRP: $455.90
You Save: $136.59 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2023 Toyota Tacoma | Base, Pre Runner, SR, SR5 | 4 Cyl 2.7 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44310-04130
$306.03 MSRP: $436.94
You Save: $130.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2013 Toyota Tacoma | X-Runner | 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44310-04120
$388.05 MSRP: $568.68
You Save: $180.63 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2004 Toyota Tacoma | Base, Pre Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44310-04100
$351.16 MSRP: $514.63
You Save: $163.47 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane; Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2015 Toyota Tacoma | Base | 4 Cyl 2.7 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44310-04110
$403.82 MSRP: $591.80
You Save: $187.98 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane; Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2004 Toyota Tacoma | Base | 4 Cyl 2.4 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44320-04050
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1996 Toyota Tacoma | Base, SR5 | 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44320-04043
$381.58 MSRP: $559.21
You Save: $177.63 (32%)
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane; Pump
- Replaces: 44320-04042
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2001 Toyota Tacoma | Base, DLX, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44320-04030
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane; Pump
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Tacoma | Base, DLX, Limited, Pre Runner, SR5, S-Runner | 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Power Steering Pump
Part Number: 44320-04041
Product Specifications
- Other Name: Pump Assembly, L/Pulley; Pump Assembly, Vane
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1996 Toyota Tacoma | Base | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS

Toyota Tacoma Power Steering Pump

Choose genuine Power Steering Pump that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Power Steering Pump for your Toyota Tacoma? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tacoma parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Tacoma Power Steering Pump Parts and Q&A

Power Steering Pump
44310-04140
Q: How to remove and replace the Power Steering Pump on Toyota Tacoma?
A:
The first step to remove and install the 2TR-FE power steering vane pump is to disconnect the negative battery cable. You must begin by taking away the engine under cover sub-assembly No. 1 from 4WD and Pre-Runner designs. First disconnect the fan along with the generator V belt. The power steering fluid needs draining before disconnecting the pressure feed tube assembly through step-by-step removal of the clip followed by return hose separation and union bolt extraction and final pressure tube detachment with gasket removal from that part. Finish the procedure with connector removal from the oil pressure switch then removal of the vane pump assembly bolts.
Power Steering Pump
44310-04100
Q: How to install a Power Steering Pump and complete the associated tasks on Toyota Tacoma?
A:
The vane pump assembly installation requires 2 bolts to be torqued at 21 Nm (214 kgf-cm, 15 ft-lbf) while the oil pressure switch connector must be connected without any oil on its surface. After securing the new gasket on the pressure feed tube you should attach it to the union bolt by torquing it to 51 Nm (520 kgf-cm, 38 ft-lbf) while connecting the return hose through the clip. The fan needs installing with a generator V belt followed by connecting the cable to the negative terminal at a torque of 3.9 Nm (40 kgf-cm, 35 in-lbf). Add power steering fluid before bleeding the power steering system. The final step includes attaching engine under cover sub-assembly No. 1 (for 4WD and Pre-Runner) and tightening it to 30 Nm (306 kgf-cm, 22 ft-lbf).