How to reassemble the hood on Toyota Tacoma?

Reassembling the hood requires first installing the hood lock control cable assembly through a string-guided process of fitting the assembly into the grommet. Install the hood lock control lever sub-assembly by connecting its cable assembly and inserting the 2 claws into their proper place. Install the hood lock control cable protector sub-assembly with 2 nuts according to specifications of 5.5 Nm (56 kgf-cm, 49 in-lbf) torque. The washer nozzle sub-assembly mounts using.HttpSession and the installation of its two claws. Begin by attaching one hood stay holder with the 2 claws and then put in the grommet and hood support in sequence. Mount the hood lock control cable assembly to the vehicle after connecting it through 3 bolts that should be tightened to 12 Nm (122 kgf-cm, 9 ft-lbf). The last installation steps include positioning of both the No. 2 hood lock release lever protector and the radiator grille.

How to disassemble the hood on Toyota Tacoma?

The engine hood disassembly process starts with removing the radiator grille followed by disconnecting the No. 2 hood lock release lever protector. You must first remove the hood lock assembly by disconnecting the control cable assembly as well as removing its three bolts. Use a clip remover to remove the two hood stay holder claws after you remove its hood grommet and support. You should start by disconnecting the washer hose then unclenching 2 claws from the washer nozzle sub-assembly. The removal of the hood lock control cable protector sub-assembly requires you to unfasten its 2 nuts. Use the clip remover to disengage the 2 claws which allows the removal of the hood lock control lever sub-assembly and hood lock control cable assembly. Secure a piece of string to the tip of the hood lock control cable assembly before eliminating the assembly while keeping the string in the wire harness grommet for later use.

OEM Toyota Tacoma Hood

Engine Hood

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hoods found

View related parts
Toyota Tacoma Hood, Front
Part Number: 53301-04220
$395.76 MSRP: $580.00
You Save: $184.24 (32%)
ADD TO CART
Product Specifications
- Other Name: Hood Sub-Assembly; Hood Panel, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2023 Toyota Tacoma | Limited, SR, SR5, Trail, Trail Special Edition, TRD Off-Road | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Tacoma Hood, Front
Part Number: 53301-04030
$347.87 MSRP: $509.80
You Save: $161.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Sub-Assembly; Hood Panel, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2000 Toyota Tacoma | Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Hood, Front
Part Number: 53301-04230
$396.44 MSRP: $581.00
You Save: $184.56 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Sub-Assembly; Hood Panel, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2023 Toyota Tacoma | TRD Pro, TRD Sport | 6 Cyl 3.5 L GAS
View related parts
Toyota Tacoma Hood, Front
Part Number: 53301-04210
$370.34 MSRP: $542.74
You Save: $172.40 (32%)
ADD TO CART
Product Specifications
- Other Name: Hood Sub-Assembly; Hood Panel, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2015 Toyota Tacoma | Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Hood, Front
Part Number: 53301-04200
$370.34 MSRP: $542.74
You Save: $172.40 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Sub-Assembly; Hood Panel, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2015 Toyota Tacoma | Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Hood, Front
Part Number: 53301-04051
$384.07 MSRP: $562.86
You Save: $178.79 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Sub-Assembly; Hood Panel, Front
- Position: Front
- Replaces: 53301-04050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Tacoma | Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Hood, Front
Part Number: 53301-04150
$395.20 MSRP: $579.16
You Save: $183.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Sub-Assembly; Hood Panel, Front
- Position: Front
- Replaces: 53301-04140, 53301-04170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2011 Toyota Tacoma | Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Hood, Front
Part Number: 53301-04120
$395.20 MSRP: $579.16
You Save: $183.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Sub-Assembly; Hood Panel, Front
- Position: Front
- Replaces: 53301-04130, 53301-04160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2011 Toyota Tacoma | Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS

Toyota Tacoma Hood

Choose genuine Hood that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Hood for your Toyota Tacoma? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tacoma parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Tacoma Hood Parts and Q&A

Hood, Front
53301-04120
Q: How to reassemble the hood on Toyota Tacoma?
A:
Reassembling the hood requires first installing the hood lock control cable assembly through a string-guided process of fitting the assembly into the grommet. Install the hood lock control lever sub-assembly by connecting its cable assembly and inserting the 2 claws into their proper place. Install the hood lock control cable protector sub-assembly with 2 nuts according to specifications of 5.5 Nm (56 kgf-cm, 49 in-lbf) torque. The washer nozzle sub-assembly mounts using.HttpSession and the installation of its two claws. Begin by attaching one hood stay holder with the 2 claws and then put in the grommet and hood support in sequence. Mount the hood lock control cable assembly to the vehicle after connecting it through 3 bolts that should be tightened to 12 Nm (122 kgf-cm, 9 ft-lbf). The last installation steps include positioning of both the No. 2 hood lock release lever protector and the radiator grille.
Hood, Front
53301-04150
Q: How to disassemble the hood on Toyota Tacoma?
A:
The engine hood disassembly process starts with removing the radiator grille followed by disconnecting the No. 2 hood lock release lever protector. You must first remove the hood lock assembly by disconnecting the control cable assembly as well as removing its three bolts. Use a clip remover to remove the two hood stay holder claws after you remove its hood grommet and support. You should start by disconnecting the washer hose then unclenching 2 claws from the washer nozzle sub-assembly. The removal of the hood lock control cable protector sub-assembly requires you to unfasten its 2 nuts. Use the clip remover to disengage the 2 claws which allows the removal of the hood lock control lever sub-assembly and hood lock control cable assembly. Secure a piece of string to the tip of the hood lock control cable assembly before eliminating the assembly while keeping the string in the wire harness grommet for later use.