My Garage
Cart
Make sure this part fits

Toyota 53301-04120
Hood, Front

2005-2011 Toyota Tacoma 5330104120

Customer Questions & Expert Answers (7)
Toyota 53301-04120 Hood, Front
  • Part Description
    Hood Sub-Assembly; Hood Panel, Front
  • Position
    Front
  • Replaces
    53301-04130, 53301-04160
  • Manufacturer
    Toyota
Make sure this part fits
$383.68 MSRP: $562.28
You Save: $178.60 (32%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Toyota
    Manufacturer Part Number53301-04120
    Part DescriptionHood Sub-Assembly; Hood Panel, Front
    Item Weight34.90 Pounds
    PositionFront
    ConditionNew
    Replaces53301-04130, 53301-04160
    ManufacturerToyota
    SKU53301-04120
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2011 Toyota TacomaBase, Pre Runner, X-Runner4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will this 53301-04120 work for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 53301-04120 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to disassemble the hood on Toyota Tacoma? Posted by Customer
    A:
    The engine hood dismantling process requires removal of the radiator grille followed by detachment of the No. 2 hood lock release lever protector. The removal process starts with the hood lock assembly which requires separating the hood lock control cable assembly while removing 3 bolts from their respective places. First remove the hood support along with the grommet afterward use a clip remover to detach the 2 claws which allows removal of the hood stay holder. The operation starts with removing the washer nozzle sub-assembly through disconnecting the washer hose and releasing the 2 claws. The hood lock control cable protector sub-assembly needs to be removed through a process that includes taking off two nuts. With the help of a tool remove the hood lock control lever sub-assembly by disconnecting the hood lock control cable assembly while releasing two claws. Leaving the string inside the wire harness grommet for later installation, tie down the hood lock control cable assembly tip with string which should exceed cable length.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to reassemble the hood on Toyota Tacoma? Posted by Customer
    A:
    Reassembling the hood requires first installing the hood lock control cable assembly through a string-guided process of fitting the assembly into the grommet. Install the hood lock control lever sub-assembly by connecting its cable assembly and inserting the 2 claws into their proper place. Install the hood lock control cable protector sub-assembly with 2 nuts according to specifications of 5.5 Nm (56 kgf-cm, 49 in-lbf) torque. The washer nozzle sub-assembly mounts using.HttpSession and the installation of its two claws. Begin by attaching one hood stay holder with the 2 claws and then put in the grommet and hood support in sequence. Mount the hood lock control cable assembly to the vehicle after connecting it through 3 bolts that should be tightened to 12 Nm (122 kgf-cm, 9 ft-lbf). The last installation steps include positioning of both the No. 2 hood lock release lever protector and the radiator grille.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the process for removing the washer nozzle sub-assembly for the 2008 Toyota Tacoma? Posted by Customer
    A:
    Disengage its 2 claws and disconnect the washer hose.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Hood
    Q:
    What is the next step after installing the washer nozzle sub-assembly for the 2005 Toyota Tacoma? Posted by Customer
    A:
    Engage the 2 claws to install the hood stay holder.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Hood
    Q:
    What comes after installing the hood lock control cable protector sub-assembly for the 2009 Toyota Tacoma? Posted by Customer
    A:
    Connect the washer hose and engage the 2 claws to install the washer nozzle sub-assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Hood
    Q:
    What is the next step after removing the hood lock control cable protector sub-assembly for the 2006 Toyota Tacoma? Posted by Customer
    A:
    Disengage the 2 claws to remove the hood lock control lever sub-assembly and disconnect the hood lock control cable assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Hood
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 53301-04120, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 53301-04120 Hood, Front. It is sometimes referred to as Toyota Hood. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 5330104120 Hood, Front. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery