How to install the hydraulic brake booster on Toyota Tacoma?

As the first step toward installing the hydraulic brake booster you must position a new brake booster gasket onto the unit before tightening the four nuts to 14 Nm (145 kgf-cm, 10 ft-lbf). Use a union nut wrench to attach the 4 brake lines at their correct positions on the hydraulic brake booster. Torque them to 15 Nm (155 kgf-cm, 11 ft-lbf) while the wrench is absent or to 14 Nm (145 kgf-cm, 10 ft-lbf) when using the torque wrench which should remain parallel to the tool. Connect three connectors then install the master cylinder push rod clevis followed by driving the driver side junction block to 8.0 Nm (82 kgf-cm, 71 in-lbf). Finish the work by installing the lower No. 1 instrument panel finish panel and the instrument panel under tray for automatic transmission as well as the instrument panel hole cover for manual transmission. Install the cowl side trim board LH for Regular Cab, Access Cab, Double Cab while moving onto the front door scuff plate LH and then the front floor footrest. To finish the repair, apply torque of 3.9 Nm (40 kgf-cm, 35 in-lbf) to the negative battery terminal cable while performing inspections of brake pedal height and free play and reserve distance and filling the reservoir with brake fluid followed by bleeding procedures for the brake booster using the accumulator pump assembly and the brake line then master cylinder solenoid and finally checking fluid levels and inspecting for leakage and brake master cylinder operation.

OEM Toyota Tacoma Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Brake Boosters found

View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04210
$570.05 MSRP: $835.43
You Save: $265.38 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2023 Toyota Tacoma | Limited, SR, SR5, Trail, Trail Special Edition, TRD Off-Road, TRD Pro, TRD Sport | 6 Cyl 3.5 L GAS
View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04182
$563.36 MSRP: $825.61
You Save: $262.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Replaces: 44610-04181, 44610-04171
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Tacoma | Base, Pre Runner, TRD Pro, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04152
$725.16 MSRP: $1062.74
You Save: $337.58 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Replaces: 44610-04150, 44610-04151
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2008 Toyota Tacoma | Base, Pre Runner, X-Runner | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04220
$563.36 MSRP: $825.61
You Save: $262.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2023 Toyota Tacoma | SR, SR5 | 4 Cyl 2.7 L GAS
View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04190
$621.49 MSRP: $910.80
You Save: $289.31 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2012 Toyota Tacoma | Base, Pre Runner, X-Runner | 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04162
$634.01 MSRP: $929.15
You Save: $295.14 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Manufacturer Note: MEXICO SPEC(W/O (VSC, SIDE & *CUSA))
- Replaces: 44610-04160, 44610-04161
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2008 Toyota Tacoma | Base, Pre Runner | 6 Cyl 4.0 L GAS
View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04110
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Tacoma | Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04111
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2004 Toyota Tacoma | Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04101
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Replaces: 44610-04100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Tacoma | Base, Pre Runner, S-Runner | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04060
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Manufacturer Note: W(ABS)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2000 Toyota Tacoma | Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04050
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2000 Toyota Tacoma | Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota Tacoma Brake Booster
Part Number: 44610-04040
Product Specifications
- Other Name: Booster Assembly, Brake; Power Brake Booster; Booster Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2000 Toyota Tacoma | Base, DLX, Limited, Pre Runner, SR5 | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

Toyota Tacoma Brake Booster

If you're thinking about purchasing OEM parts for your Toyota Tacoma, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Tacoma Brake Booster at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Tacoma Brake Booster Parts Questions & Experts Answers

Brake Booster
44610-04182
Q: How to install the hydraulic brake booster on Toyota Tacoma?
A: As the first step toward installing the hydraulic brake booster you must position a new brake booster gasket onto the unit before tightening the four nuts to 14 Nm (145 kgf-cm, 10 ft-lbf). Use a union nut wrench to attach the 4 brake lines at their correct positions on the hydraulic brake booster. Torque them to 15 Nm (155 kgf-cm, 11 ft-lbf) while the wrench is absent or to 14 Nm (145 kgf-cm, 10 ft-lbf) when using the torque wrench which should remain parallel to the tool. Connect three connectors then install the master cylinder push rod clevis followed by driving the driver side junction block to 8.0 Nm (82 kgf-cm, 71 in-lbf). Finish the work by installing the lower No. 1 instrument panel finish panel and the instrument panel under tray for automatic transmission as well as the instrument panel hole cover for manual transmission. Install the cowl side trim board LH for Regular Cab, Access Cab, Double Cab while moving onto the front door scuff plate LH and then the front floor footrest. To finish the repair, apply torque of 3.9 Nm (40 kgf-cm, 35 in-lbf) to the negative battery terminal cable while performing inspections of brake pedal height and free play and reserve distance and filling the reservoir with brake fluid followed by bleeding procedures for the brake booster using the accumulator pump assembly and the brake line then master cylinder solenoid and finally checking fluid levels and inspecting for leakage and Brake Master Cylinder operation.