Service and repair of radio
Antenna cord starts with instrument panel safety pad subassembly removal and then antenna cord sub-assembly removal along with replacing all five clamps. You should start by taking off both the pull top antenna pole subassembly and the attached antenna ornament. Before moving on to antenna assembly with holder service, users should first disconnect the connector and remove the bolt before attaching a string to the cable tip which will be stored inside the vehicle for future installation needs. The installation process starts by taking out the antenna assembly with holder while also removing its associated nut. Start by disconnecting roof headlining assembly connectors while removing the amplifier antenna assembly connectors and its 16 clamps with 3 bolts. Execute the amplifier antenna assembly installation with 16 clamps before securing the 3 bolts and reconnecting the connectors. You must first install the box of headlining on the roof then install the antenna assembly with holder using the nut while also adding bolt and connector. First install the antenna ornament before installing the pull top antenna pole subassembly then fix the antenna cord sub-assembly by using the 5 clamps before reattaching the instrument panel safety pad sub-assembly.