How to remove the Fuel Level Sensor assembly on Toyota Sequoia?

The first step to extract the 2UZ-FE FUEL fuel level sensor assembly requires removing the fuel suction with pump and gauge tube assembly. First disconnect the power connection responsible for the fuel level sensor. Crank the level sensor claw referred to as A while moving the level sensor upward to pull it out.

How to install the Fuel Level Sensor assembly on Toyota Sequoia?

For 2UZ-FE installation begin by setting the Fuel Level Sensor onto the sub tank sub-assembly and then sliding it downwards until it has reached a secure position. After the Fuel Level Sensor connector should be connected next to the Fuel Level Sensor. The next step after that involves the installation of fuel suction that combines pump as well as gauge tube assembly.

OEM Toyota Sequoia Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Level Sensors found

View related parts
Toyota Sequoia Fuel Gauge Sending Unit
Part Number: 83320-34041
$121.13 MSRP: $171.48
You Save: $50.35 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Replaces: 83320-34040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Fuel Gauge Sending Unit
Part Number: 83320-0C080
$97.99 MSRP: $137.54
You Save: $39.55 (29%)
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Hanger Assembly; Tank Sending Unit; Pump Module; Level Sensor; Fuel Sender Unit
- Replaces: 83320-0C022, 83320-0C023
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Fuel Gauge Sending Unit
Part Number: 83320-0C040
$97.63 MSRP: $137.05
You Save: $39.42 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Hanger Assembly; Tank Sending Unit; Pump Module; Level Sensor; Fuel Sender Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2017 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Fuel Gauge Sending Unit
Part Number: 83320-0C011
$96.33 MSRP: $135.21
You Save: $38.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Fuel Tank Sending Unit; Fuel Level Sensor; Fuel Sending Unit; Fuel Sender Unit
- Replaces: 83320-0C010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Fuel Gauge Sending Unit
Part Number: 83320-0C150
$73.70 MSRP: $103.44
You Save: $29.74 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Fuel Sender and Hanger Assembly; Fuel Sender Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Fuel Gauge Sending Unit
Part Number: 83320-0C030
$158.14 MSRP: $223.87
You Save: $65.73 (30%)
ADD TO CART
Product Specifications
- Other Name: Gage Assembly, Fuel Sender; Hanger Assembly; Tank Sending Unit; Level Sensor; Sending Unit; Fuel Sender Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2011 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

Toyota Sequoia Fuel Level Sensor

Choose genuine Fuel Level Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Fuel Level Sensor for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Fuel Level Sensor in Toyota Sequoia is an important subsystem that indicates the fuel status of the car to the driver. These electronic devices are built to measure the fuel level even under conditions of high temperature and the fuel consumption they indicate is fast and, for the most part, accurate. It made up of float, actuating rod and resistor through which the signals get transmitted to fuel gauge. Any problems with the fuel level sensor it is better to consult with the service. The efficiency of the sensor dictates the timely alarms for refuel, which could eliminate mistakes like a sign of a full tank, many hours after refueling.

Toyota Sequoia Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit
83320-0C080
Q: How to remove the Fuel Level Sensor assembly on Toyota Sequoia?
A:
The first step to extract the 2UZ-FE FUEL fuel level sensor assembly requires removing the fuel suction with pump and gauge tube assembly. First disconnect the power connection responsible for the fuel level sensor. Crank the level sensor claw referred to as A while moving the level sensor upward to pull it out.
Fuel Gauge Sending Unit
83320-0C030
Q: How to install the Fuel Level Sensor assembly on Toyota Sequoia?
A:
For 2UZ-FE installation begin by setting the Fuel Level Sensor onto the sub tank sub-assembly and then sliding it downwards until it has reached a secure position. After the Fuel Level Sensor connector should be connected next to the Fuel Level Sensor. The next step after that involves the installation of fuel suction that combines pump as well as gauge tube assembly.