How to effectively service and repair the Mass Air Flow Sensor on Toyota Land Cruiser?

In order to service the Mass Air Flow Sensor (MAF Sensor), begin by disconnecting the connector of the sensor. Then unscrew the two screws on the sensor and take it off. Installation is a reverse process, screws are tightened again and lastly, the sensor connector is reconnected.

How to service and repair the Mass Air Flow Sensor on Toyota Land Cruiser?

To service the Mass Air Flow Sensor, disconnect the negative battery terminal and wait 90 seconds. Remove the sensor by disconnecting its connector and unscrewing it. Reinstall by securing it and reconnecting the connector. Finally, reconnect the battery and perform initialization if required.

OEM Toyota Land Cruiser Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Mass Air Flow Sensors found

View related parts
Toyota Land Cruiser Mass Air Flow Sensor
Part Number: 22204-0F030
$118.19 MSRP: $167.31
You Save: $49.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Sub-Assembly, Intake Air Flow; MAF Sensor; Air Mass Sensor; Meter
- Replaces: 22204-75030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2021, 2006-2011 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Mass Air Flow Sensor
Part Number: 22204-75020
$130.65 MSRP: $184.95
You Save: $54.30 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Sub-Assembly, Intake Air Flow; MAF Sensor; Air Mass Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2005 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS
View related parts
Toyota Land Cruiser Meter Assembly, Intake Air Flow
Part Number: 22250-66050
$915.59 MSRP: $1341.81
You Save: $426.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1997 Toyota Land Cruiser | Base | 6 Cyl 4.5 L GAS
View related parts
Toyota Land Cruiser Mass Air Flow Sensor
Part Number: 22250-66010
Product Specifications
- Other Name: Meter Assembly, Intake Air Flow; Air Mass Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1994 Toyota Land Cruiser | Base | 6 Cyl 4.5 L GAS
View related parts
Toyota Land Cruiser Mass Air Flow Sensor
Part Number: 22250-61010
Product Specifications
- Other Name: Meter Assembly, Intake Air Flow; Air Mass Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1992 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS

Toyota Land Cruiser Mass Air Flow Sensor

If you're thinking about purchasing OEM parts for your Toyota Land Cruiser, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Land Cruiser Mass Air Flow Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Land Cruiser Mass Air Flow Sensor Parts and Q&A

Mass Air Flow Sensor
22204-75020
Q: How to effectively service and repair the Mass Air Flow Sensor on Toyota Land Cruiser?
A: In order to service the Mass Air Flow Sensor (MAF Sensor), begin by disconnecting the connector of the sensor. Then unscrew the two screws on the sensor and take it off. Installation is a reverse process, screws are tightened again and lastly, the sensor connector is reconnected.
Mass Air Flow Sensor
22204-0F030
Q: How to service and repair the Mass Air Flow Sensor on Toyota Land Cruiser?
A: To service the Mass Air Flow Sensor, disconnect the negative battery terminal and wait 90 seconds. Remove the sensor by disconnecting its connector and unscrewing it. Reinstall by securing it and reconnecting the connector. Finally, reconnect the battery and perform initialization if required.