How to remove the Drive Shaft with center bearing shaft assembly on Toyota Highlander?

The first step to remove the propeller shaft with center bearing shaft assembly requires users to keep holding the brake pedal in position. A 6 mm hexagon wrench can be used to loosen the cross-groove joint set bolts half a turn but always keep cloth or equivalent inside the universal joint cover to protect the boot from contact. Next, place matchmarks on the rear propeller shaft and rear drive pinion flange sub-assembly. The system needs removal of 4 nuts along with 4 bolts and 4 washers then you implement the 4 bolts and 4 adjusting shims removing operation. A brass bar and a hammer will be used to remove the propeller shaft with center bearing shaft assembly before inserting Special Service Tool: 09325-20010 into the transfer to stop oil leakage.

OEM Toyota Highlander Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Drive Shafts found

View related parts
Toyota Highlander Shaft Assembly, Propeller W/Center Bearing
Part Number: 37100-48020
$869.85 MSRP: $1274.78
You Save: $404.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Highlander | Base, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Highlander Drive Shaft, Rear
Part Number: 37100-48070
$706.87 MSRP: $1035.93
You Save: $329.06 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Rear; Driveshaft; Drive Shaft Assembly; Shaft Assembly, Propeller W/Center Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota Highlander | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Drive Shaft, Rear
Part Number: 37100-48060
$829.67 MSRP: $1215.89
You Save: $386.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Drive Shaft, Rear; Driveshaft; Drive Shaft Assembly; Shaft Assembly, Propeller W/Center Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota Highlander | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Shaft Assembly, Propeller W/Center Bearing
Part Number: 37100-48050
$822.52 MSRP: $1205.42
You Save: $382.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Drive Shaft
Part Number: 37100-48030
$723.10 MSRP: $1059.71
You Save: $336.61 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Propeller; Driveshaft; Shaft Assembly, Propeller W/Center Bearing
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2013 Toyota Highlander | Base, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Toyota Highlander Drive Shaft

If you're thinking about purchasing OEM parts for your Toyota Highlander, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Highlander Drive Shaft at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Highlander Drive Shaft Parts Questions & Experts Answers

Drive Shaft
37100-48030
Q: How to remove the Drive Shaft with center bearing shaft assembly on Toyota Highlander?
A: The first step to remove the propeller shaft with center bearing shaft assembly requires users to keep holding the brake pedal in position. A 6 mm hexagon wrench can be used to loosen the cross-groove joint set bolts half a turn but always keep cloth or equivalent inside the universal joint cover to protect the boot from contact. Next, place matchmarks on the rear propeller shaft and rear drive pinion flange sub-assembly. The system needs removal of 4 nuts along with 4 bolts and 4 washers then you implement the 4 bolts and 4 adjusting shims removing operation. A brass bar and a hammer will be used to remove the propeller shaft with center bearing shaft assembly before inserting Special Service Tool: 09325-20010 into the transfer to stop oil leakage.