Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1984-1997 Toyota Corolla | Base, CE, DLX, DLX All Trac, DX, FX, FX16, FX16 GTS, GTS, LE, LE Limited, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L DIESEL, 4 Cyl 1.8 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1984-1997 Toyota Corolla | Base, CE, DLX, DLX All Trac, DX, FX, FX16, FX16 GTS, GTS, LE, LE Limited, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L DIESEL, 4 Cyl 1.8 L GAS
Other Name: V-Belt; Serpentine Belt Drive Kit; Serpentine Belt; Drive Belt
Replaces: 90080-91047
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1993 Toyota Corolla | Base, DX, LE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
| Page 1 of 2 |Next >
1-20 of 34 Results
Toyota Corolla Drive Belt
If you're thinking about purchasing OEM parts for your Toyota Corolla, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Corolla Drive Belt at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to remove the drive belt on Toyota Corolla?
A: Removing the drive belt of the 1ZZ-FE engine To remove the drive belt of the 1ZZ-FE engine, first remove the engine under cover. At that, discharge strain along the fan and generator V belt by rotating the tensioner clockwise, then remove the belt. Return the tensioner gradually back to its unloaded state and do not use extreme force.
Q: How to service and repair the drive belt on Toyota Corolla?
A: To align the drive belt, take off the engine under cover RH then loosen tension on the fan and generator V belt by turning the tensioner clockwise. Install belt again, taking care to ensure that the tensioner goes back gradually to unloaded position. Lastly, re-fit engine under cover RH.