How to service the Air Bag Control Module on Toyota Celica?

The Air Bag Control Module can be serviced by taking out a number of different panels and disconnecting the Air Bag sensor leads. Install and remove the sensor assembly with Torx tool, making sure it is not over-tightened and checking it does not damage the sensor. Install All panels again and do not use any reused Air Bag sensor assembly of a collision.

How to Service and Repair the Air Bag Control Module on Toyota Celica?

In order to fix the Air Bag Control Module, you have to take off different panels and unconnect the Air Bag sensor connectors. Install and reinstall the sensor assembly with a Torx wrench and make sure that the connection and torque is correct. Make sure that there is no damage or interference, and reassemble the panels. Confirm the stability of the assembly, and check it.

OEM Toyota Celica Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bag Control Modules found

View related parts
Toyota Celica SDM Module
Part Number: 89170-20180
$668.67 MSRP: $841.73
You Save: $173.06 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Diag Unit W/Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2005 Toyota Celica | GT, GTS | 4 Cyl 1.8 L GAS
View related parts
Toyota Celica SDM Module
Part Number: 89170-20190
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Control Module; Diag Unit W/Sensor
- Manufacturer Note: *80,DRIVER SIDE & PASSENGER SIDE & SIDE
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2005 Toyota Celica | GT, GTS | 4 Cyl 1.8 L GAS
View related parts
Toyota Celica SDM Module
Part Number: 89170-20090
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Diagnostic Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-1999 Toyota Celica | GT | 4 Cyl 2.2 L GAS
View related parts
Toyota Celica Impact Sensor
Part Number: 89170-20020
Product Specifications
- Other Name: Sensor Assembly, Air Bag; SDM Module; Diagnostic Unit
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1994-1998 Toyota Celica | GT, ST | 4 Cyl 1.8 L GAS, 4 Cyl 2.2 L GAS
View related parts
Toyota Celica Impact Sensor
Part Number: 89170-20011
Product Specifications
- Other Name: Sensor Assembly, Air Bag; Air Bag Sensor; Sensor
- Replaces: 89170-20010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1993 Toyota Celica | All Trac, GT, GTS, GTS All Trac, ST | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS

Toyota Celica Air Bag Control Module

If you're thinking about purchasing OEM parts for your Toyota Celica, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Celica Air Bag Control Module at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Celica Air Bag Control Module Parts and Q&A

SDM Module
89170-20190
Q: How to service the Air Bag Control Module on Toyota Celica?
A: The Air Bag Control Module can be serviced by taking out a number of different panels and disconnecting the Air Bag Sensor leads. Install and remove the sensor assembly with Torx tool, making sure it is not over-tightened and checking it does not damage the sensor. Install All panels again and do not use any reused Air Bag sensor assembly of a collision.
SDM Module
89170-20180
Q: How to Service and Repair the Air Bag Control Module on Toyota Celica?
A: In order to fix the Air Bag Control Module, you have to take off different panels and unconnect the Air Bag Sensor connectors. Install and reinstall the sensor assembly with a Torx wrench and make sure that the connection and torque is correct. Make sure that there is no damage or interference, and reassemble the panels. Confirm the stability of the assembly, and check it.