How to replace the Timing Cover or Timing Chain Case Oil Seal on Toyota Camry?

One must start the replacement process of the Timing Gear Case and Timing Chain Case Oil Seal by disassembling the front wheel RH followed by the front fender apron seal RH, engine cover sub-assembly No. 1 and engine moving control rod with bracket through bolt removal. The following replacement sequence involves the steps of removing engine mounting stay No. 2 RH and engine mounting bracket No. 2 RH followed by fan and generator V belt removal with Special Service Tool: 09249-63010. Lay out the crankshaft pulley; for TMC models apply Special Service Tool: 09213-54015 (91651-60855), 09330-00021 for bolt loosening while Special Service Tool: 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021) does the removal work. When working on TMMK models you need Special Service Tool: 09960-10010 (09962-01000, 09963-01000) to loosen the bolt and Special Service Tool: Cut off the oil seal lip with a knife followed by screwdriver prying to remove it while checking the crankshaft for damage which requires sandpaper (#400) mending when present. Professional Service Tool: 09223-22010 and a hammer help install the new oil seal properly after applying MP grease to the lip and cleaning away foreign substances before tapping it to reach the same level as the rear oil seal retainer edge while wiping off additional grease from the crankshaft. The reinstall process of the crankshaft pulley requires key alignment with the key groove; TMC models must use Special Service Tool: 09213-54015 (91651-60855), 09330-00021 to torque the pulley bolt to 170 Nm (1,733 kgf-cm, 125 ft. lbs.), while TMMK models need Special Service Tool: 09960-10010 (09962-01000, 09963-01000) to achieve the same torque. Proceed by using Special Service Tool: 09249-63010 to install the fan and generator V belt before tightening the engine mounting bracket No. 2 RH to 52 Nm (531 kgf-cm, 38 ft. lbs.) and the engine mounting stay No. 2 RH to 64 Nm (653 kgf-cm, 47 ft. lbs.). Begin by installing the engine moving control rod with bracket through three bolts and torque them to 64 Nm (653 kgf-cm, 47 ft. lbs.). Afterwards, install the front wheel RH with 103 Nm (1,050 kgf-cm, 76 ft. lbs.) torque. Finally, inspect for oil leaks.

OEM Toyota Camry Timing Cover

Engine Timing Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

33 Timing Covers found

View related parts
Toyota Camry Timing Cover, Outer
Part Number: 11320-F0010
$222.74 MSRP: $318.02
You Save: $95.28 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly, Timing Chain Or Belt; Engine Timing Cover, Outer; Front Cover; Outer Timing Cover; Cover Assembly, Timing Chain
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2024 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
View related parts
Toyota Camry Timing Cover
Part Number: 11310-0H010
$237.76 MSRP: $339.47
You Save: $101.71 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assembly, Timing Chain Or Belt; Engine Timing Cover; Front Cover; Cover Sub-Assembly, Timing Chain Or Belt
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2005 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS
View related parts
Toyota Camry Front Cover, Upper Outer
Part Number: 11322-0A010
$92.24 MSRP: $129.47
You Save: $37.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Timing Belt; Engine Timing Cover, Outer Upper; Timing Cover
- Manufacturer Note: (L)
- Position: Upper Outer
- Replaces: 11322-20900, 11322-20901, 11322-20010, 11322-20011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1994-1997 Toyota Camry | CE, LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Timing Cover
Part Number: 11303-74040
$73.70 MSRP: $103.44
You Save: $29.74 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Sub-Assembly, Timing Chain; Front Cover; Upper Timing Cover; Cover, Timing Chain Or Belt
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996 Toyota Camry | DX, LE, XLE | 4 Cyl 2.2 L GAS
View related parts
Toyota Camry Outer Cover
Part Number: 11322-0V010
$41.24 MSRP: $57.41
You Save: $16.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Timing Gear; Cover, Timing Belt
- Manufacturer Note: *212
- Replaces: 11322-36010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2011 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.5 L GAS
View related parts
Toyota Camry Timing Cover, Lower
Part Number: 11302-0A020
$55.56 MSRP: $77.32
You Save: $21.76 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Sub-Assembly, Timing Chain; Engine Timing Cover, Lower; Front Cover; Outer Timing Cover; Cover, Timing Belt
- Manufacturer Note: (L)
- Position: Lower
- Replaces: 11302-20040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2003 Toyota Camry | LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Outer Timing Cover, Lower
Part Number: 11323-F0010
$42.05 MSRP: $58.54
You Save: $16.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Timing Chain; Engine Timing Cover, Outer Lower; Timing Cover
- Position: Lower Outer
- Replaces: 11323-25010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2024 Toyota Camry | L, LE, SE, SE Nightshade, XLE, XSE | 4 Cyl 2.5 L GAS
View related parts
Toyota Camry Oil Pump
Part Number: 11310-0V010
$376.24 MSRP: $551.39
You Save: $175.15 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover Assembly, Timing Chain Or Belt; Engine Timing Cover; Timing Cover; Cover Sub-Assembly, Timing Chain Or Belt
- Manufacturer Note: *212
- Replaces: 11310-36030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2011 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.5 L GAS
View related parts
Toyota Camry Timing Cover, Upper Inner
Part Number: 11304-74060
Product Specifications
- Other Name: Cover Sub-Assembly, Timing Chain; Engine Timing Cover, Inner Upper; Front Cover; Inner Timing Cover; Cover, Sub-Assembly, Timing Belt
- Position: Upper Inner
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-2001 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS
View related parts
Toyota Camry Cover Sub-Assembly, Timing Chain Or Belt
Part Number: 11302-62020
Product Specifications
- Other Name: Cover Sub-Assembly, Timing Chain; Timing Cover
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1993 Toyota Camry | DLX, DX, LE, SE, XLE | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Timing Cover
Part Number: 11303-74030
Product Specifications
- Other Name: Cover Sub-Assembly, Timing Chain; Upper Timing Cover; Cover, Timing Chain Or Belt
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1995 Toyota Camry | DLX, DX, LE, XLE | 4 Cyl 2.2 L GAS
View related parts
Toyota Camry Cover, Timing Belt, Upper Outer
Part Number: 11322-20030
Product Specifications
- Other Name: Timing Cover
- Manufacturer Note: (J)
- Position: Upper Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-1999 Toyota Camry | CE, LE, XLE | 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Timing Cover
Part Number: 11302-63010
Product Specifications
- Other Name: Cover Sub-Assembly, Timing Belt; Lower Timing Cover; Cover Sub-Assembly, Timing Chain Or Belt
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1986 Toyota Camry | DLX, LE | 4 Cyl 1.8 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Toyota Camry Upper Timing Cover
Part Number: 11303-62020
Product Specifications
- Other Name: Cover Sub-Assembly, Timing Chain; Timing Cover; Cover, Timing Chain Or Belt
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1991 Toyota Camry | DLX, LE | 6 Cyl 2.5 L GAS
View related parts
Toyota Camry Cover, Timing Belt, Lower
Part Number: 11321-0A010
Product Specifications
- Other Name: Timing Cover
- Manufacturer Note: (L)
- Position: Lower
- Replaces: 11321-20010, 11321-20020, 11321-20900
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1999 Toyota Camry | CE, LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Timing Cover
Part Number: 11303-63010
Product Specifications
- Other Name: Cover Sub-Assembly, Timing Belt; Upper Timing Cover; Cover, Timing Chain Or Belt
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1986 Toyota Camry | DLX, LE | 4 Cyl 1.8 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Toyota Camry Timing Cover
Part Number: 11303-74010
Product Specifications
- Other Name: Cover Sub-Assembly, Timing Chain; Upper Timing Cover; Cover, Timing Chain Or Belt
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1987-1991 Toyota Camry | Base, DLX, DLX All Trac, LE, LE All Trac | 4 Cyl 2.0 L GAS
View related parts
Toyota Camry Front Cover
Part Number: 11322-0A020
Product Specifications
- Other Name: Cover, Timing Belt; Timing Cover; Outer Timing Cover
- Manufacturer Note: (L)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-1999 Toyota Camry | CE, LE, XLE | 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Timing Cover
Part Number: 11304-20902
Product Specifications
- Other Name: Cover Sub-Assembly Belt; Front Cover; Upper Timing Cover; Inner Timing Cover; Cover, Timing Belt
- Replaces: 11304-20020, 11304-20900, 11304-20010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1997 Toyota Camry | CE, LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Cover, Timing Chain Or Belt
Part Number: 11303-62030
Product Specifications
- Other Name: Cover Sub-Assembly, Timing Chain; Timing Cover
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1993 Toyota Camry | DLX, DX, LE, SE, XLE | 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 33 Results

Toyota Camry Timing Cover

Choose genuine Timing Cover that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Timing Cover for your Toyota Camry? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Camry parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Camry Timing Cover is one of the most significant parts that work at the center of operations for Toyota's top-selling mid-size sedan. Used to shield the timing mechanism, the Timing Cover encases the timing belt or chain via isolating it from contaminants to avert the hampering of the engine's performance. The Toyota Camry Timing Cover is usually made of steel, plastic or aluminum to ensure that it can be able to take the harshest conditions while on the road and at the same time increase the general security of the automobile. Since the engine's inception in 1982, compatibility with the Toyota Camry model that has gone through different generations makes it crucial when it comes to preservation of the engine. This Timing Cover needs constant upkeep and replacement because it plays a part in the timing system of an engine, which affects fuel consumption and a car's safety. For instance, the Toyota Camry Timing Cover always uses gaskets that increase its shielding capacities making it unique in the automobile business. The Timing Cover plays a basic yet significant role in the Toyota Camry's reliability; moreover, it ensures that any driver would have a functional vehicle to drive. It is for this reason that the qualities of the Time Cover still characterise the newer models of the Toyota Camry, demonstrating the company's dedication to the production of quality cars across all of its models.

Toyota Camry Timing Cover Parts and Q&A

Timing Cover, Upper Outer
11303-20040
Q: How to replace the Timing Cover or Timing Chain Case Oil Seal on Toyota Camry?
A:
One must start the replacement process of the Timing Gear Case and Timing Chain Case Oil Seal by disassembling the front wheel RH followed by the front fender apron seal RH, engine cover sub-assembly No. 1 and engine moving control rod with bracket through bolt removal. The following replacement sequence involves the steps of removing engine mounting stay No. 2 RH and engine mounting bracket No. 2 RH followed by fan and generator V belt removal with Special Service Tool: 09249-63010. Lay out the crankshaft pulley; for TMC models apply Special Service Tool: 09213-54015 (91651-60855), 09330-00021 for bolt loosening while Special Service Tool: 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021) does the removal work. When working on TMMK models you need Special Service Tool: 09960-10010 (09962-01000, 09963-01000) to loosen the bolt and Special Service Tool: Cut off the oil seal lip with a knife followed by screwdriver prying to remove it while checking the crankshaft for damage which requires sandpaper (#400) mending when present. Professional Service Tool: 09223-22010 and a hammer help install the new oil seal properly after applying MP grease to the lip and cleaning away foreign substances before tapping it to reach the same level as the rear oil seal retainer edge while wiping off additional grease from the crankshaft. The reinstall process of the crankshaft pulley requires key alignment with the key groove; TMC models must use Special Service Tool: 09213-54015 (91651-60855), 09330-00021 to torque the pulley bolt to 170 Nm (1,733 kgf-cm, 125 ft. lbs.), while TMMK models need Special Service Tool: 09960-10010 (09962-01000, 09963-01000) to achieve the same torque. Proceed by using Special Service Tool: 09249-63010 to install the fan and generator V belt before tightening the engine mounting bracket No. 2 RH to 52 Nm (531 kgf-cm, 38 ft. lbs.) and the engine mounting stay No. 2 RH to 64 Nm (653 kgf-cm, 47 ft. lbs.). Begin by installing the engine moving control rod with bracket through three bolts and torque them to 64 Nm (653 kgf-cm, 47 ft. lbs.). Afterwards, install the front wheel RH with 103 Nm (1,050 kgf-cm, 76 ft. lbs.) torque. Finally, inspect for oil leaks.