×
ToyotaParts- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Toyota Parts
- Scion Parts
My Garage
My Account
Cart
OEM Scion xB Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Wiper Motors found
Scion xB Wiper Motor, Front
Part Number: 85110-60400$166.60 MSRP: $235.85You Save: $69.25 (30%)Ships in 1-3 Business Days
Scion xB Wiper Motor, Rear
Part Number: 85130-12A10$145.81 MSRP: $206.40You Save: $60.59 (30%)Ships in 1-3 Business Days
Scion xB Wiper Motor, Rear
Part Number: 85130-52030$206.54 MSRP: $294.90You Save: $88.36 (30%)Ships in 1-3 Business Days
Scion xB Wiper Motor
If you're thinking about purchasing OEM parts for your Scion xB, our website is your one-stop destination. We stock an extensive selection of genuine Scion xB Wiper Motor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Scion xB Wiper Motor Parts Questions & Experts Answers
- Q: How to service the rear wiper motor on Scion xB?A: A proper rear wiper motor service requires disconnecting the battery negative cable while waiting 90 seconds to avoid activating the Air Bags and seat belt pretensioners. The back door trim board must come off before you detach the rear wiper arm and blade assembly through opening the cover and removing the nut. The first step for servicing the rear wiper motor includes detaching the connector then removing its 3 mounting bolts. You should connect the 3 bolts to the rear wiper motor assembly with 5.4 Nm torque (55 kgf-cm or 47 in.-lbf) before reconnecting the connector for installation. Install the rear wiper motor grommet according to the diagram before mounting the rear wiper arm together with blade assembly. The wiper operative should activate the automatic stop position first then file off wiper arm serrations and brush clean the wiper pivot before threading the wiper arm through which the operative torques to 5.4 Nm (55 kgf-cm, 47 in.-lbf). Use water from the washer fluid to operate the wiper while maintaining pressure on the arm hinge until you finish fastening the nut. This step allows a wiping test for proper function as well as a confirmation that the wiper clears the vehicle body structure. To finish the back door trim installation process you should place the back door trim board in position and connect the cable terminal to the negative part of the battery.
