How to service the Mass Air Flow Sensor on Scion xB?

To service the Mass Air Flow Sensor, disconnect the negative battery terminal and wait 90 seconds. Remove the sensor by disconnecting its connector and unscrewing it. Install a new O-ring, secure the sensor, reconnect the connector, and reconnect the battery terminal.

How to properly remove the Mass Air Flow Sensor on Scion xB?

To remove the mass air flow sensor off the 2AZ-FE engine control system begin by disconnecting the connector. Then loosen the two screws on which the sensor is attached, and remove it carefully.

OEM Scion xB Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mass Air Flow Sensors found

View related parts
Scion xB Meter Sub-Assembly, Intake Air Flow
Part Number: 22204-31020
$144.98 MSRP: $205.24
You Save: $60.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mass Air Flow Sensor
- Replaces: 22204-0P010, 22204-0H010, 22204-31010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2015 Scion xB | Base | 4 Cyl 2.4 L GAS
View related parts
Scion xB Mass Air Flow Sensor
Part Number: 22204-22010
$140.99 MSRP: $199.59
You Save: $58.60 (30%)
ADD TO CART
Product Specifications
- Other Name: Meter Sub-Assembly, Intake Air Flow; Crankcase Breather; Air Mass Sensor; MAF Sensor; MAF; Meter Assembly, Intake Air Flow
- Manufacturer Note: (J)
- Replaces: 22204-0C020, 22204-0D030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Scion xB | Base | 4 Cyl 1.5 L GAS

Scion xB Mass Air Flow Sensor

If you're thinking about purchasing OEM parts for your Scion xB, our website is your one-stop destination. We stock an extensive selection of genuine Scion xB Mass Air Flow Sensor at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Scion xB Mass Air Flow Sensor Parts and Q&A

Mass Air Flow Sensor
22204-22010
Q: How to service the Mass Air Flow Sensor on Scion xB?
A: To service the Mass Air Flow Sensor, disconnect the negative battery terminal and wait 90 seconds. Remove the sensor by disconnecting its connector and unscrewing it. Install a new O-ring, secure the sensor, reconnect the connector, and reconnect the battery terminal.
Meter Sub-Assembly, Intake Air Flow
22204-31020
Q: How to properly remove the Mass Air Flow Sensor on Scion xB?
A: To remove the mass air flow sensor off the 2AZ-FE engine control system begin by disconnecting the connector. Then loosen the two screws on which the sensor is attached, and remove it carefully.